• Registered users are encouraged to enable MFA/2FA to add an aditional layer of security to their account. More information can be found here: https://www.ncsc.gov.uk/collection/top-tips-for-staying-secure-online/activate-2-step-verification-on-your-email

EP3 Flashy's CG EP3 premier

More importantly, how does it drive? Hopefully more like you had imagined the first time around!

Sent from my Mi MIX 3 using Tapatalk
 
Drives really nicely, the torque curve had a little dip but that's been ironed out. Discussed with Matt at DMS and an RBC looks likely as a future mod. Really good firm, recommend them.
 

Attachments

  • 20190803_144920-2016x930.jpg
    20190803_144920-2016x930.jpg
    351.4 KB · Views: 49
I know buddy ;)
I'm pleased (for now). On the lookout for an RBC next.

Have you considered the skunk 2 ultra intake manifold Flashy? It’s a bit more expensive than a RBC but recent tests from Jesse halford showed it out performed all other intake manifolds by a long way.
 
Been thinking for a while about adding a velocity stack to my teg m, spent a lot of today fiddling about with it, but it's done :)
Possibly a first for this particular mod?
 

Attachments

  • 20190817_105340-930x2016.jpg
    20190817_105340-930x2016.jpg
    393.9 KB · Views: 51
  • 20190817_120011-2016x930.jpg
    20190817_120011-2016x930.jpg
    418.7 KB · Views: 48
  • 20190817_120703-2016x930.jpg
    20190817_120703-2016x930.jpg
    584 KB · Views: 47
  • 20190817_121037-2016x930.jpg
    20190817_121037-2016x930.jpg
    449.2 KB · Views: 43
  • 20190817_170339-1395x3024.jpg
    20190817_170339-1395x3024.jpg
    869.6 KB · Views: 48
  • 20190817_170403-3024x1395.jpg
    20190817_170403-3024x1395.jpg
    807.7 KB · Views: 47
I've adjusted my modification slightly by removing part of the teg m and the velocity stack with oem filter. I now have a 7.5" velocity stack thanks to the jetstream ramair filter. Test drive shortly :D

Got the best of both worlds, a proven intake now with a large velocity stack and filter.
 

Attachments

  • 20190830_173950-2016x930.jpg
    20190830_173950-2016x930.jpg
    668.3 KB · Views: 40
  • 20190830_174437-2016x930.jpg
    20190830_174437-2016x930.jpg
    633.4 KB · Views: 42
  • 20190830_174903-930x2016.jpg
    20190830_174903-930x2016.jpg
    512.4 KB · Views: 44
  • 20190830_180329-1128x2448.jpg
    20190830_180329-1128x2448.jpg
    470.6 KB · Views: 43
Cleaned. I need to get my eibach pro kit springs on soon.
 

Attachments

  • 20190901_154755-3024x1395.jpg
    20190901_154755-3024x1395.jpg
    852.4 KB · Views: 42
Lookin' good! Will you also have camber arms and camer bolts? Or do you already have them?
 
Cheers. I have the camber arms and bolts already on. Will probably refresh the shocks when fitting the springs, undecided on which to get though. What are your Koni like?
 
I'm getting an RRC manifold to replace the oem prb, will be mapped with my current mods. Can't wait.
 
That will be interesting to see the difference it makes.

I'm sure you'll keep us posted on the progress.

Sent from my Mi MIX 3 using Tapatalk
 
I just saw this post on Facebook which shows a map tweak after a 421 manifold was fitted replacing the standard one.

Dyno shows a 10bhp peak and a few ft lbs along the way, not as much as I'd have thought to be honest. But every little helps!
54c7e1c80656ba07d24097a9c590790f.jpg


Sent from my Mi MIX 3 using Tapatalk
 
Hmmm, a lot of ep3's with bolt ons make around 245bhp - exhaust/header/intake and induction, all mapped. Going from this info where only 10bhp peak was added, could I see around 225 to 235bhp simply adding the RRC to my mods? I would have all bolt ons apart from the header.
 
Back
Top