- Messages
- 158
I am getting thereAnyone turned their Reb Brembos into BrownBos?
A more aggressive pad does it.
Sent from my SM-N960F using Tapatalk
I am getting thereAnyone turned their Reb Brembos into BrownBos?
A more aggressive pad does it.
When you go +R and do the hold it will say fully off in the dash and you need to press ok to clear the written warning.
Sent from my SM-N960F using Tapatalk
Yeah AC off is a must, with it on you are heating the air with the warm condenser before it flows through the main rad.
I found the conti’s pretty bad, they rolled over onto the sidewalls unless I put more pressure in them at which point they overheated after a single lap.
Smeared a good deal of pad material over the front discs too but it’s clearing up slowly.
I run DS2500 pads in the rear and I am getting 2 or 3 front sets to 1 rear with 2nd stage "traction" turned off. The oem pads are pretty soft on the rear.Yes, think I have done that but rear pads are still getting eaten at twice the speed of the fronts. Maybe that's normal.
I run DS2500 pads in the rear and I am getting 2 or 3 front sets to 1 rear with 2nd stage "traction" turned off. The oem pads are pretty soft on the rear.
Sent from my SM-N960F using Tapatalk
Bit more aggressive on the disk and they take some heat to get a decent bite. I am on my 2nd set after using up the oem pads, disk wear is not too bad. From an insurance perspective they do not carry the road use certification as they are classed as race use only.Is there a downside to using DS2500?
Bit more aggressive on the disk and they take some heat to get a decent bite. I am on my 2nd set after using up the oem pads, disk wear is not too bad. From an insurance perspective they do not carry the road use certification as they are classed as race use only.
Sent from my SM-N960F using Tapatalk
If you struggle to get a set drop me a pm, EBC also have an offerings if they get their finger out and make some!Thanks, will take a look.
Almost everything but the sound?
Get a Remus! (still wont pop and f4rt though)
Pleased it's gone, looks much better with out, saved a few grams of weight too.
Yep, back on the Ring for the last 2 days, I normally use Pagid RS29s and I used them today. Yesterday I was testing a new prototype race pad from EBC.cooking 'em on track arcam?
out of interest, which ones you used? i've a theory but waiting to prove right/wrong on 14th when i'm back at donny