Hello,
I have a 2008 FN2 Type R model with 46k miles.
I do have two issues :
1) Clutch stiffness : The Bit point is on the floor, clutch is so stiff, really hard in traffic, seems to be a mechanism issue. I have checked the fluid level and colour, it is all perfect ! Do I then have to change the clutch ? At so low mileage it is very suprising and disapointing ?
If so, what clutch replacement would you recommand ? Not really into OEM as it seems to fail too fast, but more an Exedy stage 1 ? What do you think please ?
2) I Have installed bucket seat and do have the Airbag light on. I have installed a 3.3ohms resistor on the big yellow connector, but light still on. I wonder if 3.3ohms is correct (I have read somewhere 2.2ohms is more adapted ??). Also there is a second yellow connector, smaller, so do I need also to put a resistor there too ?
Thanks for your help
I have a 2008 FN2 Type R model with 46k miles.
I do have two issues :
1) Clutch stiffness : The Bit point is on the floor, clutch is so stiff, really hard in traffic, seems to be a mechanism issue. I have checked the fluid level and colour, it is all perfect ! Do I then have to change the clutch ? At so low mileage it is very suprising and disapointing ?
If so, what clutch replacement would you recommand ? Not really into OEM as it seems to fail too fast, but more an Exedy stage 1 ? What do you think please ?
2) I Have installed bucket seat and do have the Airbag light on. I have installed a 3.3ohms resistor on the big yellow connector, but light still on. I wonder if 3.3ohms is correct (I have read somewhere 2.2ohms is more adapted ??). Also there is a second yellow connector, smaller, so do I need also to put a resistor there too ?
Thanks for your help