• Registered users are encouraged to enable MFA/2FA to add an aditional layer of security to their account. More information can be found here: https://www.ncsc.gov.uk/collection/top-tips-for-staying-secure-online/activate-2-step-verification-on-your-email

EP3 bonnet catch mechanism

Messages
501
Hi, I think the cable has become disconnected at the bonnet catch end, so I cant open the bonnet, cable at bonnet pull moves OK at the handle end but it feels like there is nothing on the end.
Anybody had similar problem or any ideas how to get the bonnet open :(:(:(

I did think I'll take the bumper off but it attached under the bonnet...
 
Last edited by a moderator:
Hi, now all sorted.....

I undid the bottom bolt securing the bonnet slam/cross member, which is situated in the middle at the bottom near the radiator, this allows the whole panel to move/flex slightly upwards. So by a gentle lift of the bonnet about 20-25 mm and wedging open, it allows access to the latch. Looking closely (use a torch) you can see the three bolts attaching the bonnet mechanism, using 1/4" drive socket set, undid the three 10mm bolts and bingo the bonnet is open. It is very fiddly and you need lots of patience but worth it in the end.:cool:

I'm now sourcing a new bonnet release cable . :D
 
Back
Top