• Registered users are encouraged to enable MFA/2FA to add an aditional layer of security to their account. More information can be found here: https://www.ncsc.gov.uk/collection/top-tips-for-staying-secure-online/activate-2-step-verification-on-your-email

RBC fuel rail screws?

Messages
78
Hey!

I have bought a RBC inlet manifold for my EP3 but it didn't come with like the screws in the inlet to attach the fuel rail... Is it possible to take the screws from the standard manifold?

On the first picture is the manifold I've bought and the second picture I've marked what I mean is missing from my one :)

Pictures: https://imgur.com/a/2641vM7

Thanks in advance!
 
Last edited by a moderator:
They are studs. Something like M6. Measure the thread size and length and order off ebay. They'll be pennies new.

Or try using two nuts locked together to wind them out of your old manifold and move them across.
 
They are studs. Something like M6. Measure the thread size and length and order off ebay. They'll be pennies new.

Or try using two nuts locked together to wind them out of your old manifold and move them across.

Alright, I'll try to get them from the standard manifold off if it doesn't work I'll order some off eBay :)

Thanks for answer!
 
I replaced mine with standard m6 bolts, I was too lazy to cut the bolts to the exact length so just packed them out with some washers. If you get stuck any local garage will give you a couple of bolts I'm sure, they cost pence.

Sent from my Mi MIX 3 using Tapatalk
 
I replaced mine with standard m6 bolts, I was too lazy to cut the bolts to the exact length so just packed them out with some washers. If you get stuck any local garage will give you a couple of bolts I'm sure, they cost pence.

Sent from my Mi MIX 3 using Tapatalk

Alright, sounds good. Great that it isn't any special kind of bolts that only can be bought from Honda :)

Thanks for the answer!
 
Back
Top