Fit sandwich plate to oil filter housing
Fit new oil filter
Run lines through gearbox mount
Connect lines to cooler
Mount cooler to front crash bar on "cotton reel" mounts
(optional) drill front bumper to provide airflow
I ran the oil cooler pipes behind the manifold and over the gearbox, cable tie the lines to the wiring harness, over the top of the rad to the cooler.
I welded 2 studs to the lower of the front panel. So the oil cooler is bolted to both crash bar and lower panel. I'll upload a few pictures
Phew - so you can fit an oil cooler even when you have aircon? It's just that I can see your aircon rad in front of the main one!
Umm - I don't suppose you have any more pics do you, Lewisgame?
Hi, I fitted mine slightly differently than Partyvan. I was told to leave the original cooler sandwich plate and oem water/oil cooler inplace, (as it puts the new sandwich plate close to the block and difficult to attach hoses. Fitted outlets pointing upwards and ran the hoses over the top of the engine and put the 19 row oil cooler on the crash bar behind the bumper - see pics
[/URL][/IMG][/URL][/IMG][/URL][/IMG][/URL][/IMG]