Recent content by BIBULENT

Found the problem both droplinks need replacing

Yes ep3 2003 89k

Ive got a misfire at low revs and it only occurs when the engine is hot. I've had the valve clearances done. Recently serviced with new air filter.plugs.oil change.air temp meter replacement and new spark plugs. I'm at a loss as to what else could be causing the problem like I say it only...

It's a power flow back box

Will check em pal

I checked top mounts and all is ok also removed wheel and inspected the caliper and that's free aswell the exhaust seems ok but the two rubbers I replaced are twisted but when I give the exhaust a jolt it's not catching on anything? Don't know what else to check

How do you get to the top mounts through the boot?

Ye.one caliper slider had seized so I freed it up and put it back on and the knocking started a couple of days after but I can't see how that is what's causing the noise the noise is when the rear suspension is in indifference?

My ep3 has recently developed a knocking on the rear end near side I thought it was the rear exhaust rubbers so I've replaced them as the exhaust pipe was close to the rear anti roll bar.also had a mechanic take a look at drop links and arms and can't find anything the noise isnt a low...

Will keep an eye on them thanks

I had the valve clearances done last week and honda didn't say anything bout the timing chain in bad shape. Will it make any kind of noticiable noise if worn? Cheers

I currently own a ep3 with close to 89k anyone know without checking the chain when its due or the sound it makes?

I'm wanting to remove the heat shield under the drivers seat as when its rained and going through puddles the exhaust vibrates under the seat is it a wise move to remove it or put some heat shield around the exhaust also how and what tools are needed to take it off? Any help appreciated guys...

Saying that the engine is a little noisy as in tapping

I will check the plugs