Recent content by richyi

Hill just a quicky. What's the tread size and pitch for the long bolt which fastens the rear top camber arms to the hubs. I need to get some locknuts for arms I brought . Cheers

Cheers mate

How much was it from dealer mate?

Hi guys , I'm really really struggling to find a brake master cylinder for my 03 ctr . Everyone I order in or check has the brake pipe outlets on the wrong side of the cylinder . All second hand ones on eBay are correct with the outlets pointing right( looking at cylinder from front of car) (...

I did notice when I bled it that on the left front and right rear when pumping the pedal. The pedal it self was very lazy to return. Was fine for the front right and rear left . Wondering if the master cylinder is playing up.

Pedal feels nice and firm as you press the brake but then feels like there's a lil to much travel when pushed harder.

Hi all hope you had a good Xmas and new year. Hope for some advice and thoughts on this one Just before Xmas I fitted new dicks and pads all round on my ctr ep3, replaced them with kinetix grooved and dimpled discs with brembo pads. Also changed the fluid to ate blue. I ran them now for bout...

Did mine with the bumper on . Easy enough with the wheel and inner mug shield off

I had some degree of success using red colour magic and a mop . But three panels were beyond help lol . Ended up painting them

The lights don't need modifying but the wiring looms do, the Plugd are different on a few connectors and ur need to rewire it to run separate hi and lo beam bulbs. Do a quick search and ur see there's one way with relays or u can do with as I did. I did this conversion last weekend to my pre...