Search results

hi guys, im wondering if its worth changing the dual mass flywheel in my car to a single mass from the fk8? i read on a car throttle page that their was around 7kg difference which i can imagine makes the engine alot happier thanks

Hi guys, i have read about people changing tyres for rim protection etc but i've not seen anyone mention if there is any added grip from doing this? i know on my dc5 it increased comfort and will no doubt do the same on my fk2 but is there any traction benefit from doing this? i know upping...

Hi guys I am currently chasing what sounds like a top mount issue on my ep3. I have changed ALL parts of my front suspension inc new genuine hubs and shocks apart from Lca bushes as it needed a revamp. it still has a noise whilst driving though :( It doesn't matter if it is in gear/out of gear...

Ok i have changed the drive shaft bearing and the noise seems to have died down a lot more. I still have what sounds like a wheel bearing noise on certain roads though. I have done a lot of google searches on this and cannot find much apart from problems relating to the gearbox and when the...

I think I have found the fault. I think it's the drive shaft bearing making the noise as I ran the dare with the front wheels of the ground and the bearing seems noisy. Has anyone changed these before?

hi guys, i have a whirring noise similar to a wheel bearing on its way out and wondered if anyone could maybe shed some light on it to the possible cause. i have had and done the following- changed front ball joints with new genuine knuckles and FAG bearing so i know its not that. skunk2 2...

The suspension is standard by the way

hi thanks for the reply. I have done both wheel bearings now and both have slight play. I know the drive shaft nuts are tight and so are the ball joint nuts, everything I have taken off is definitely tight. The play is occurs when my hands rock the wheel at a 7 o'clock and 2 o'clock position. I...

hi guys I have just changed my nearside front wheel bearing for a new one due to finding play in the offside one and thought I would do both at the same time. I have now fitted the 1st one and i appear to have play in the wheel when before I didn't. The bearing is a skf one not OE. any...

thanks

hi guys, I am sorry if this has been covered before but I performed a search but I couldn't find anything. I want to buy a set of seat covers off ebay and just wanted to know if the premier seats had airbags? I know I have an airbag light that goes off after 5secs or so on the dash but cant see...

Hi guys. Just a quick question. The dipstick on my ep3 seems a little stiff when removing it to check the oil. Even more so when it's hot. I can see that it has two o rings on it and assume it due to expansion of these. Has anyone else noticed this? Possibly due to the high compression ratio to...

hi guys, I have been looking for a set for wheel nut covers in either red or black. I have done a search but I couldn't find anything. I have found some tpi ones but don't know if they will fit both oem nuts and locking nuts. I have looked into wheel bolts but I have read a few stories about...

thank you for the reply hazz. i have just fitted some goodyear eagle f1 asymmetric 2 tyres to the front yesterday and even though they are new the difference can be seen. when i bought the car it had michelin exalto's on the front and evergreen eu72 on the rear, so i have put the michelins on...

thanks for the replies no im not trying to do the fast FRSU on the cheap. i believe you get what you pay for and i ways go for the most expensive parts i can afford. i just found conflicting information when i did the search and thought if the car wasn't lowered then i may not need them. does...

hi guys, i know this has been covered many times before but i just wanted to know if i really need camber arms. i have completely standard suspension and i have read a few threads that suggest that you dont need them for minor adjust on the rear unless lowered. can anyone clear this up for me...

Hi guy's, I had a diff put in my car and after it has been installed I can select gears easily but when I deselect 5th its stiff when doing so. 6th is fine so im a bit lost to what the problem could be. I know I need to top up the box oil tomorrow when I can get it from honda but there is...

sorry for the late reply, works been busy. thanks for the reply

thanks for the reply. So the jdm ones have been known to fall off before then? I have read that the jdm ones can be a pain to fit if you use the clips? also do they go into the window channels at all or rest on the outside, except for the clips? thanks

hi guys im new here but have been lurking for a while :) I bought a set of climair black wind deflectors (special order from Germany) which have been on the car for 4 days but I have my heart set on genuine jdm ones. my question since I will be selling the climair ones is are they really worth...