Search results

I took the arb off the weekend and it was upside down, :confused: there is loads of clearance on the lower control now. to be fair the car does handle a lot better now. Thanks guys for your help Paul

Ive just had a look at mine and it pointing down so i think is upside down :( :mad: i will take it off and flip it. its just weird how its only one side that is rubbing? Thanks guys for your help Paul

Thanks for the repiles guys, i did take off the arb because i had to cut one of the old drop links off. am i right in thinking that the middle section of the arb is slightly pointing up when fitted correctly

Hi there guys i recently changed all my anti roll bar links (drop links) because the other were knackered. now on the rear passenger side the anti roll bar touches and rubs the lower control arm. The other side has loads of clearance. Just wondered if anybody had any ideas Thanks Paul

Yes that what I mean all the ranges 1.4, 1.6 type s etc

Hi folks Just a quick question.. Will all ep3 inner arches fit a ep3 type r. Some previous owner has cut mine in half Thanks Paul

Hi there can anyone tell me the diameter and length of a Skunk2 Weighted gear knob. Im currently making my own at work and would like to know how much difference in size it is from standard Thanks Paul

Hi Guys Im in need of the brackets that hold the inlet manifold cover on As pictured below Sorry admin if this isnt aloud, please remove post if need be

does anyone know where i can get purge control solenoid from apart from honda, im gonna try and block the idle assist off in a bit thanks for the replies guys

is it just best just to get a delete kit or is it best to get another assist valve

the car seems to be running ok, but will it be affected in away

Hi guys I've just lifted the bonnet and found these hoses. One looks like a vacuum hose as its connected to the inlet manifold and has a m10 bolt rammed in it and the other looks like a fuel return [/URL][/IMG] Ps the white spot are just cutting compound lol Thanks Paul