• Registered users are encouraged to enable MFA/2FA to add an aditional layer of security to their account. More information can be found here: https://www.ncsc.gov.uk/collection/top-tips-for-staying-secure-online/activate-2-step-verification-on-your-email

Recent content by Jack6969

  1. Jack6969

    EP3 struggling to start and bogging down

    Ive done tests on the coil packs with a multi-meter and there all showing numbers within the tolerances #-oive just been on another short drive and its getting worse by the mile .. now if i go to accelerate at all it just kanagaroos like mad but if i hold the pedal steady it drives along just...
  2. Jack6969

    EP3 struggling to start and bogging down

    Hi there guys, i hope your sunday is going better then mine so far! Basically about a week ago i noticed my ep3 was taking longer to start then usual, i usually turn the engine over and within a second or so it fires up straight away but it was taking a good 4-5 seconds to start so i...
  3. Jack6969

    Fitting facelift wing mirrors to pre-facelift EP3

    I had someone PM me a while ago about doing this conversion but they couldn't get the mirrors to adjust at all, turned out before they messaged me they had a go themselves just connecting any old wire together and in the end he found out he had burnt out the actual switch! Could you have...
  4. Jack6969

    Fitting facelift wing mirrors to pre-facelift EP3

    There the exact combinations I used mate, I connected them using a multimeter then took them back of to have them sprayed and I wrote that list so I knew how to wire them back up .. do you have a multi-meter?
  5. Jack6969

    Fitting facelift wing mirrors to pre-facelift EP3

    Yeah like I say cut the plugs off and put bullet connectors on the ends of every wire (I used female on the factory wires and male on the wing mirror wires) then connect them as per that picture above and everything should work on them fine (:
  6. Jack6969

    Fitting facelift wing mirrors to pre-facelift EP3

    Top half is passenger side bottom half is drivers side, I hope I get good karma for this ;) haha
  7. Jack6969

    Fitting facelift wing mirrors to pre-facelift EP3

    Yeah I did mate, I cut both the plugs off and connected them via bullet connectors, I used a multimeter to find out what wire did what. Jack
  8. Jack6969

    Another RBC question .. hole near TB flange?

    Thats what i though but How come nothing gets said about it in the guide?
  9. Jack6969

    Another RBC question .. hole near TB flange?

    Alright guys! Making the most of these 4 days off and doing a few mods to the ep3, first on the list was the rbc which i fitted today, everything went fine until i went to start the car and it reving its nuts off!! fluctuating between 4k-5k. ive checked for leaks everywhere but cant find any...
  10. Jack6969

    Fitting facelift wing mirrors to pre-facelift EP3

    Ahh that's fine then, ill just tap into the wiring for the side repeaters. Im planning on a front end respray when the weather improves so ill get the side repeaters removed and smoothed in. Thanks
  11. Jack6969

    Fitting facelift wing mirrors to pre-facelift EP3

    Did a search on this but surprisingly I can't seem to find any info on it.. Anyways I've won a pair of facelift wing mirrors on eBay for a matter of pence and just wondered what the wiring is like a compared to my pre-facelift mirrors? Have I got a nightmare on my hands or not? Any help...
  12. Jack6969

    Pre-facelift to Facelift Headlight Conversion

    Theres also these which i used for mine, only took 7 days to come aswell http://www.ebay.co.uk/itm/270955271521?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
  13. Jack6969

    opinions on my dash?

    At the end of the day it cost me £22 for 2 sticker bomb books, i expect the stickers to start fading in a few months or so but its something different for the mean time, i would love to have it skinned with wet carbon but have been told by a professional it would be very hard as the resin would...
  14. Jack6969

    opinions on my dash?

    Yeah I will do after I've done my complete windscreen (Y) .... I know it's not to everyone's taste but I like it and some others might aswell, just putting it out out there ..
  15. Jack6969

    opinions on my dash?

    I carboned mine aswell, got it absolutely perfect then about a week later after a hot day it had all lifted around the buttons and vents at the top :( So i did this .. It know its not to everyones taste but i think it looks the balls haha and its different ofcourse 8) Jack
Back
Top