Recent content by JoniBlaze

I had this all done, including new ball joints (Hardrace) and new steering arms (Blueprint) TGM did all the new bolts and bits as well as re greasing everything up. They didn’t need to take the manifold off in the end so didn’t have one done. Was going to go with a DC5 manifold and Cat, so got...

Quick update, my car is at TGM for 1. Replacement radiator, Mishimoto 2. Steering rack refurb, slider, guide and various other bolts boots and bits 3. Check for all suspension play, including ball joints and shocks 4. Installation of a 4-2-1 manifold Will let you know how it goes.

Any update?

I think I will be getting this done still.

How did it go?

So what parts are they actually replacing? Doing springs was a load of rubbish, the shocks don't like it and it drives a bit 'gay' if I'm honest. I'm now thinking of doing Tein Coilovers, hardrace ball joints and new wishbone superpro bushes.

It would be really good to know the outcome. The quoted me £330 to change the rack including alignment. My car is an early 02 pre facelift - what is yours? I also have the Eibach pro springs. TGM did it, they changed the track rods at the same time but didn't do the dampers. Also, have you...

Did this improve your steering or not?

I'm going to be getting my steering rack replaced as its not quite self centring correctly. How do I identify that's its a facelift rack I'm buying (going to see some at a breakers but they're already out of the car) and would you recommend replacing the slider with the Honda part or the K...

As these worth doing?

I’ve checked with Honda my rack was done and there is nothing left to do. Is it worth putting on a refurbished facelift rack? How much would this cost roughly? Thx

No standard tyre size. No spacers. Negative camber was -1.00 but FRSU's are a load of crap with camber bolts because its not a proper way to adjust camber you need to do that with top mounts. The bolts will turn when you hit a pot hole anyway.

My pre-facelift has a steering issue. It pulls straight on a flat surface but when going along normal bendy roads it will just pull off in every direction with the bumps and camber of the road like there is a complete lack of control. It will seem to be light in one direction and then slightly...

Does anyone know if a DC 4-2-1 decat manifold and Fujitsabo RMA01 exhaust would pass most UK track day noise limits? I understand taking the Cat off any car would make it louder I know the Fujitsabo exhaust note is quieter than most but if you added the decat manifold would it then make it as...

Can anyone help with this. It appeared after jump starting someones car, my car wasn't running and keys may have been in the ignition....big mistake Anyway, The code was PO171 - System too lean bank 1. At the time it had a re-flashed K100 ECU from CPL on it. This made the car horrendous to...