Search results

Gutted! Thanks mate

Hi, anyone know if this size alloy fit a Ep3? 17X7.0J P.C.D 5X100 E.T +50 if not what will i need to make them fit?

Hi all, Here is my Ep3 had it for 9 years old with 41100 miles. mods Tegiwa intake Toda manifold Rbc intake Fujitsubo RM01a cat back Tegiwa etd Sfs hose Buddyclub condensor J's racing oil and rad cap Matt black cam cover from bren with red carbon plug cover Progress 24mm rear anti...

Engine spec/gear mods short shifter metal gear bush kit Tegiwa induction kit Toda manifold RBC intake Hondata gasket BC condenser SFC intake hose Tegiwa etd Matt black cam cover/red carbon cover J's racing rad and oil cap Fujitsubo RM01a cat cack K-pro'd at Eurospec 239bhp 175ftlb @5500rpm...

Sorry if its been posted before but is there a list of parts that can be fitted with minimum modification between EP3/DC5/ATR/DC2? things like strut braces, exhausts, manifolds etc

Hi, Anyone help me i.d this sensor please? its from a set of Defi gauges need to know if its repairable or will i have to get a replacement before i take it all to have the gauges fitted. Gauges are oil temp and water temp

Anyone on here fabricate some? They can make good money

Thanks Ped but i have a double din stereo so that's not suitable for me, I'm loving yours though Loxy not seen any like those before, where did you get them from?

Hi, Has anyone got pictures of Defi's or any other gauges fitted please? In two minds of wether to have them in the pillar or above the centre console in a pod. I'm not to keen on the wires showing have seen some centre console cowls on eBay and pillar pod but still can't decide, any help...

Model Of Car Civic EP3 Year Of Car 2002 Mileage Covered 39000 Wheel BHP 188.8 Flywheel BHP 225.4 Dyno Manufacturer Euro spec 2000 Modifications Tegiwa intake, J's Racing mani with 2-1 pipe, Fujitsubo RM01A

I Have 215/45/17 fitted Falkens 452 on the front and kumo31 on the rear been wearing them because they came fitted with some alloys only fitted Bridgestone re040 fitted previously but find the 215/45/17 fitment better riding but you lose some steering feel due to higher side wall but suits the...

jdm

thats good to know the toda fits a lot better then the j's the j's was a bit blowy around the joints

i have the tegiwa etd fitted i thought there all the same getting some engine mounts fitted before this one goes as well.

shocking! looks like its not been welded lol

its been sent off to get repaired should of took a picture for reference lol i'll see if its gone when i pick the car up in a bit.

toda fitted now picking my car up today!

I have a etd fitted but think I'll get the engine mounts fitted as well, any one recommend some to me or the all the same? Gutted about the j's I'm getting it repaired bought them both second hand for good prices but gutted all the same.

it was the j's racing manifold clean snap lol i'm going to have have a toda fitted tomorrow bought it as a deal, thing is it has no flexi pipe just a mini de cat pipe? any one seen one like this before?

That's good then I thought I needed a remap, it doesn't sound normal can't really explain it I can't take it past 3000rpm it's just unbearable. It's off the road at the moment till Monday getting it looked over then.

I have my car k-pro'd and had some grounding leads fitted today car was fine but about an hour later whilst driving my car became really loud like the exhaust and manifold had snapped checked everything seems fine. Will the k-pro be reset when the grounding leads where fitted? Cheers Pui

Thanks for the heads up James they said they can get me one delivered in 4 weeks lol, I wont be using them then. Got myself a Fujitsubo RM01 fitted today! my search for an exhaust is over i'm well happy with.

I've just bought one 2nd hand looks like steviewondered pics above, fitting it tomorrow so ill let you know.

pmsl funny guy suits!

me too then thats sounds nasty! would loud gun shot bangs on the up change occasionally be the start of engine detonation?

yeah i heard that too probaly does but i'm an impatient Bas***d and wanted it fitted lol sounds much better and pulls better i think, i map should improve things though. I've had mine on about 1 month now no problems yet.

any one have one of these fitted? on there Ep3 thinking of getting one from Rising sun performance works about around £571 delivered no import charges as there based in holland delivery time around 5 weeks. Has any one used them?

I have a j's racing manifold fitted to mine without a re-map i thought i got away with the engine managment light as well but it came on the other week. My car runs fine but i'll get it mapped one day when i get the money together.

thanks for info and the vids Goose, nice DC2's you have there i've wanted one of those.

Anybody here with a 5zigen miracle fireball fitted or had any experience with them?

no i dont want it any louder, i have a j's racing manifold and 2-1 pipe fitted and a mongoose cat back system. I dont know wether to spend £310 on the silenced one or go the whole hog and get the j's racing fx60rs titanium but worried the j's cat back will be too loud. I'm happy with the sound...

Does any one know wether there's any power difference between the silenced one and the unsilenced one?

cool! thanks just got one off ebay lol will have to track down a JDM front arb thanks for advice

Hi All, Just wondering if any one on here has a J's racing manifold and the 2-1 fitted? Any thoughts and opions on this set up? will i need anything to modify to fit this to a EP3 slam panel jdm front arb etc.