Search results

what tools + (socket sizes etc) do i need to get my backbox off?

has anyone got a 50mm drop they can show me ?

the lever down in the drivers footwell to open the bonnet on my ep3 has snapped clean off and i need a new one does anybody know the part number for this or know what it is called speciafically so i can search for one on the net. thanks.

iam currently running stock springs but want to change to some eibachs, but dont no how much to drop it. any reccommendations? i cnt go too low as i got a sportex b pipe and it will scrap like hell! just want to lower the car to give it a more aggresive look!

My caliper on the rear on of ep3 isnt seeming to opening back up fully and the pads are rubbing on the brake disc, why would this be? And isit a new caliper and pads job or can abit of diy sort the problem? Thanks guys

when you buy a k100 or kpro do u buy the ecu then take ti to the garage then they will create your map? or do you get a map with the peice of kit? becasue the guy iam dealing with has said it may be cheaper for me to buy the k100 and get wherever i buy it from to supply a map for it aswel... so...

ive got EBC discs with redstuff pads on the rear of my EP and as i work away for a few weeks at a time when i come home and drive it again sometimes i an hear the rear disc rubbing it almosts sounds like. dont spose anyones had any problems simular and can shed any light? cheers

iam looking for a garage closest to norwich that will do a map with a k100 for me.... anyone no where there is a garage atall? thanks

http://www.ebay.co.uk/itm/SEIBON-02-05-Civic-Si-Carbon-Fiber-Spoiler-Wing-MG-EP3-/370328754326?pt=Motors_Car_Truck_Parts_Accessories&hash=item5639505896#ht_1846wt_1043 will this fit my EP3 without having to mod anything?

iam running a std header with a sportex unsilenced race tube and a spoon N1... its LOUD!!! does anyone know if i'll pass an MOT with these mods?

iam running a spoon N1 with a sportex 2.5" race tube and just recently i can hear it starting to knock slightly up near the bend on the backbox. it wasnt before so how can i put this right. any ideas?

ive just bought a spoon n1 with a sportex unsilenced b pipe. ive also ordered all new gaskets and fittings to fit it up with. ive ordered just straight oem replacments for it are they okay to fit it all together or do i need different fitting to mate these two new parts together? thanks

ive just bought a new centre pipe and i need to change the gaskets and nuts and bolts between on both ends, could anyone tell me what the names of the things iam looking for are please? i did check out the parts page on the lings site but i still didnt really know what i was looking at. would...

anyone know the part numbers for the exhaust gasket between the midpipe and cat and also the backbox to midpipe gasket? much appriated

whats peoples opinions of the sportex silenced race tube? it will be mated to a spoon n1 backbox. what will it sound like you recon? iam trying to achive a sporty raspy sound not a deep boy racer tune. and as i cant find ANY spoon b pipes anywhere secondhand!! so iam looking to other alternaives.

I cant find any spoon b pipe on the second hand market so what other b pipes would fit my spooon n1 backbox without modification? What are silenced pipes like ? I like the scorpion b pipes anyone had experience with scorpion?

what do secondhand mugen style spoilers go for?

whats the perfect drop iam looking for to gain a best advantage for a FRSU

iam looking to have a FRSU done but dont know what figures i need to ask for. can anyone tell me??

Opinions on apex 30mm springs? Are they any good, anyone got previous experience with these? Let me know your thoughts

whats rated as a good for its price exhaust mani? i hear japspeed are not bad for the price but i hear there made crap. plus i cant reall afford somthing top of the range toda etc. so looking for middle of the market really.

Hey guys i brought my new EP3 the other day and iam unsure of what oil is in it. So iam just gona do an oil change and start from scratch. So to do and oil change is it just the case of removing the sump plug and taking off the filter and letting it all drain, then after Pop it back on and fill...

i want a Spoon N1 backbox but cant seem to find any secondhand at the moment. but people are telling me they have the rep and it still does just as good of job for the price. but surly the replica has to be cheaply made and surly the baffles cant be half as decent am i right? plus i believe for...

Reccommended Oil and petrol for the EP3?

What colour should i have my wheels on my NHB ? Hmmmmm any ideas?

Can anybody help? Ive got a 6000k hid xenon kit On my ep3 and when i turn the headlights on i start to get interference with my radio signal. When i turn them Back off the radio works Perfectly again. Anyone had this issue with theirs n know whats the cause and no how to fix the Problem? Thanks

anyone had experince with a scorpion silenced centre pipe mounted to stock back box?

are HID xzneon headlights legal and pass an MOT?

hey whats the difference between an EP2 and EP3?

anybody know any insurance companies where you can get away with not declaring offenses? if so which ones! thanks :)

anybody know any methods of cleaning rust of discs and calipers to bring them back to there former glory?

iam now about to buy an EP3 and the guys told me it has LSD. do EP's come with slip diff? i didnt think they did? :confused:

anybody know anywhere in norfolk that map k100's?

hi peeps, had a quote of a few bits i want doing to the EP and just want to see if you think iam getting a good fair price on it all or am i being overcharged. heres the list. quotation came from TDI North The intakes (tegiwa) are £526 supplied and fitted with new intake pipe and scuttle...

Hey everyone! just want to get any reviews of people running such things as tegiwa inductions, exhausts, mani's etc to see what their opinons of them are if possible. Reason being as you all know their parts are priced really low compared to others. so are they rubbish quality? or are their...

What tyres are recommended for the performance and price guys? :) what are people running?

just wondering whats the perfect wheel size for the Ep3? 17s like the OEMs or maybe got 18? wanna buy the best size for handling you see :)

hey! somebody recommended a buddyclub short shifter to me as a good mod but i dont really know what sort of benefits it will have to me. do i have to be running other supporting mods to make it beneficial to me? or will it still have effect standard. thanks :)

hiya iam a newbie and iam looking at getting an exhaust system fitted to the EP3. i just want to get an idea on what people are running, see what peoples opinons are in terms of performance and sound, also see what exhausts seem to be worth there pennies and the ones that arent! which exhausts...

hey peeps iam a newbie and iam now on the verge of buying an EP3 CTR peice of god!! :D lol i want to lightly/mildly modify it. i have shopped around and looked at reveiws of peices of kit and everyone has there own opinions of things and mixed emotions so cant seem to choose which is the best...