Search results

To see how much your car is lowered by you would need access to the CTR manual for measurements, i think Honda measure from the centre line of the wheel arch to the centre line of the hub

Tom is a top guy, go with Eibach springs

OEM ones will be better than EBC, Try Ferodo DS2500 pads

Most companys who make wheels for Hondas will use a similar bolting face, buddy club make some pretty good cost effective nuts

The bypass mod would work better with a Hondata heatshield gasket **

You have to remove the throttle body off the inlet manifold, the valve is bolted onto the TB by security screws so get a small hacksaw blade and cut a flat on each bolt so you can undo them with a screw driver, remove the valve assy, spray blake cleaner on the cylinder part of the valve as you...

If you just fit the rear one you wont notice much change, but if you fit the front one on tick over the dash rattles, if you have K Pro its easy to fix by upping the idle a bit

There only realy usefull if you need additional ports to measure pressure or want to fit a big power fuel system, but they do look bling bling!

Both systems wont pass a track side noise test **, but at least with the Spoon you can inter-change back boxs to get you through noise testing and power gains are made from the b-pipe not the back box

The jdm ecu wont work properley if at all partly due to different sensors managing closed loop control ie O2 sensors,etc

An update gents, CPL tested the ecu, TDi North tested the ecu both successfully, the car left ourselves and then developed a fault, once the customer reported the fault we checked ourselves and then asked CPL to test the ecu as well, all of us seen the same issue. This is the first issue we...

The car wheel spins in 5th gear, so I need to do a lot of work on traction, any one have shares in Toyo :lol:

There are 4 variants of the K24, I believe I have the better one :lol: Sorry I'm not going to use the car just yet, needs more testing & parts fitted :cry:

I went for the HKS filter due to the size of the turbo inlet diameter, same size as the HKS To4Z on the Skyline :wink:

Lets hope its not my arse getin kicked :)

Thanks for the pos feedback :D I have a feeling its going to get better before next year tho. It was trying to launch its self out of the dyno at full power :shock:

We have successfully transplanted the K24 engine into our CTR, the engine is standard except for a Hondata K Pro, AEM CAI, Toda 4-2-1 and Toda cat back. We decided we had taken the K20 as far as we could with various cam combinations, stroker kit, ITB’s, forced induction, etc. We chose...

Paul, I have put the prices in the traders section

Thanks chaps, gone even quicker now 13.27@106 :lol:

After attending the RWB event at Shakespeare County Raceway we posted an even quicker time than at the last round of the Jap Racer series. 60ft 2.06 1/4 mile 13.27 ET 105.67 The only additions since the last race was the new Toda Hi-power exhaust system and re-map. :lol:

There on order :lol:

I was waiting for that :cry:

Thanks mate :wink:

Thanks Carl its great to have been included in this league and I have had a lot of fun in my first year of drag racing. :D

After winning all FWD rounds of this series at Shakespeare County Raceway we have become FWD Champions 2005, including the Rotorstock 2 which was held over 2 days.

Thanks chaps, I am sorry Carl I cant make it i have a wedding to go too. I just need to get my launch sorted out with the new clutch in :oops:

Just finished the last round of the Jap Racer series with the stroker kit/N2 cams and got a time of 13.47 @ 110. :D

Jap Racer FWD class 2005 Champion, finished the last round today with the above fastest time held at Shakespeare county raceway. 8) Hope to be going faster very soon :wink:

G, Whats your best 1/4 mile time

Thanks G, It will be good to see the improvements on the black stuff.

Thanks for the kind offers to run my car in, its a little like can I take your wife out for a drink :? Depending on piston size chosen it can either be re-bored or bores de-glazed. Any way its all run in, tuned and with the Toda N2 cams its producing 240bhp@wheels.