- Messages
- 4
Hi guys (And girls if there is any XD)
I'm David from Portugal (Lisbon), and i'm 26. My job and hoobie is the same: Welder. I work as a welder, and because of my love to cars (Specially Honda off course) i do some exhausts to my cars and to some friends cars.
I had a few HONDA since i have my driver licence. My passion and love for Hondas was with my first 93'' EG9 Civic VTI. Had it for 4 years and along that time i changed it almost everything that was possible. XD
B18C6 = 240hp/200nm
- BuddyClub Spec4 camshafts
- Toda Springs and Supertech Retainers
- OEM ITR Valves
- Wiseco high comp pistons 11,5:1
- Moroso baffle sump
- Sk2 Intake Header + 66mm TB
- PLM 4-2-1 Exhaust Headers / 2.5'' straight b-pipe / Vibrant muffler
- ASR + OEM ITR ARB + Blox end-links + Tegiwa LCA + Cusco Coilovers + Energy Suspension Full Kit
- OEM DC5 Recaro seats + Takata Harness
- Rota Circuit 10 (daily) / Rota Attack (trackdays)
OK, now i'm going to show you my actual Honda.
It's an 00'' Honda Integra Type-R. When I bought it was 100% stock, but i can't drive stock cars for more than 1 month XD.
1st Some pics 100% Stock:
And now it's like this:
Spec List:
Exterior:
- Aerodynamics CARBON Hood
- Aerodynamics CARBON Mirrors
- Aerocatch Hood Flush Locking Kit
- Aerotwin Front Wipers
- Rear Wiper Plug Delete OEM HONDA
Interior:
- OEM Recaro DC2
- OEM Momo Steering Wheel
- OEM ITR Shift Knob + OEM ITR Short Shift
- OEM HONDA Pioneer Radio
- Genuine OEM Honda Clutch & Break Rubber Pedal
Engine:
- Advenced Clucht Tecnology (ACT) AI4-SPG6 - Sport/Race Sprung 6 Pad
- Tegiwa CARBON Intake (Mugen Rep.)
- SPOON KEVLAR Spark Plug Cover
- Moroso Baffled Oil Pan
- Mishimoto Water Radiator
- Slim Radiator Fan
- TEGIWA MAGNETIC OIL SUMP PLUG
- NGK IRIDIUM IX SPARK PLUGS
Exhaust:
- TEGIWA Exhaust Manifold
- B-Pipe Muffler
- Rear Mufler Spoon N1 (home made)
Suspension:
- Racing Logic Coilovers
- HEL Stainless Steel Braided hoses + Carbon Look
- Team Dynamics Pro Race Series 15''x7'' OffSet +35 PDC 5x114,3
- TOYO R1-R
- BluePrint Rear Hub Bearings
- Blox LugNuts (Black)
I would appreciate some comments or critics about it
Cumps, Dave
I'm David from Portugal (Lisbon), and i'm 26. My job and hoobie is the same: Welder. I work as a welder, and because of my love to cars (Specially Honda off course) i do some exhausts to my cars and to some friends cars.
I had a few HONDA since i have my driver licence. My passion and love for Hondas was with my first 93'' EG9 Civic VTI. Had it for 4 years and along that time i changed it almost everything that was possible. XD
B18C6 = 240hp/200nm
- BuddyClub Spec4 camshafts
- Toda Springs and Supertech Retainers
- OEM ITR Valves
- Wiseco high comp pistons 11,5:1
- Moroso baffle sump
- Sk2 Intake Header + 66mm TB
- PLM 4-2-1 Exhaust Headers / 2.5'' straight b-pipe / Vibrant muffler
- ASR + OEM ITR ARB + Blox end-links + Tegiwa LCA + Cusco Coilovers + Energy Suspension Full Kit
- OEM DC5 Recaro seats + Takata Harness
- Rota Circuit 10 (daily) / Rota Attack (trackdays)
OK, now i'm going to show you my actual Honda.
It's an 00'' Honda Integra Type-R. When I bought it was 100% stock, but i can't drive stock cars for more than 1 month XD.
1st Some pics 100% Stock:
And now it's like this:
Spec List:
Exterior:
- Aerodynamics CARBON Hood
- Aerodynamics CARBON Mirrors
- Aerocatch Hood Flush Locking Kit
- Aerotwin Front Wipers
- Rear Wiper Plug Delete OEM HONDA
Interior:
- OEM Recaro DC2
- OEM Momo Steering Wheel
- OEM ITR Shift Knob + OEM ITR Short Shift
- OEM HONDA Pioneer Radio
- Genuine OEM Honda Clutch & Break Rubber Pedal
Engine:
- Advenced Clucht Tecnology (ACT) AI4-SPG6 - Sport/Race Sprung 6 Pad
- Tegiwa CARBON Intake (Mugen Rep.)
- SPOON KEVLAR Spark Plug Cover
- Moroso Baffled Oil Pan
- Mishimoto Water Radiator
- Slim Radiator Fan
- TEGIWA MAGNETIC OIL SUMP PLUG
- NGK IRIDIUM IX SPARK PLUGS
Exhaust:
- TEGIWA Exhaust Manifold
- B-Pipe Muffler
- Rear Mufler Spoon N1 (home made)
Suspension:
- Racing Logic Coilovers
- HEL Stainless Steel Braided hoses + Carbon Look
- Team Dynamics Pro Race Series 15''x7'' OffSet +35 PDC 5x114,3
- TOYO R1-R
- BluePrint Rear Hub Bearings
- Blox LugNuts (Black)
I would appreciate some comments or critics about it
Cumps, Dave
Last edited by a moderator: