Drag cartel 002 P0341 code problem

[Thoroughbred]

Hi guys...need advice,installed new camshafts drag cartel stage 2 with supertech valve springs...went for a remap and nothing could be done because it throws an error p0341 camshafts position timing...my mechanic is 100% sure timing is okay and car does feel okay but there is no vtec also...ecu is completely stock.
Has anyone had similar problem after installing new camshafts? I will be checking the timing but just to gather as much info before,maybe it has something to do with new cams since those are much more aggressive than stock?

 

[Loxy]

It's either timing, dodgy sensor or the connector.

Money is on the timing, sensor is reporting the cam is in the wrong place...

 

[mike.h]

If the connection to the rear sensor is dodgy it can show up. When looking at the engine at the right hand side of the block there's two electrical connectors - http://www.ipgparts.com/store/images/D/DSC00088-01.JPG - the one it's complaining about is the rear I think. With the engine off try disconnecting it, checking it's clean/undamaged, and reconnecting it.

Try restarting the engine again.

It's an easy thing to overlook.

EDIT: if it's disconnected you'd get a different code, oops.

 

[Thoroughbred]

Thanks...looks like I need drag cartel cam gears...adjustable...waiting for confirmation from drag cartel...epic fail)

 

[Thoroughbred]

Can I get any adj.cam gear brand or it must be drag cartel? Looking at tegiwa shop only skunk2...