• Registered users are encouraged to enable MFA/2FA to add an aditional layer of security to their account. More information can be found here: https://www.ncsc.gov.uk/collection/top-tips-for-staying-secure-online/activate-2-step-verification-on-your-email

Ep3 brakes?

D

Devon k20

Messages
14
Hello I have been enjoying the sun lately I drive a ep3 2002 and have cooked and warped my brakes I am currently running brembo vented disks with ferodo ds2500 pads with front and rear I'm looking to upgrade as I punish my brakes when driving,

i was was wondering from your personal experience from what brakes to go for as in disks and pads I'm not looking to upgrade the callipers I have brake ducts in place already just wasn't enough
also has anyone had experience with MTEC brakes at all ?
 
You won't have warped them, it'll be DS2500 deposits on the discs. I'd be looking at trying another pad on a new disc combined with fluid and hoses.
 
Thank you for replying I forgot to mention I have braded lines in place as well as uprated fluid i could pull the disks off today and clock them in the lathe to see if there running concentric and flat but I just want to upgrade would you recommend any set ups ?
 
Budget would help. In my own experience, DS2500's are terrible at leaving deposits on discs.
 
For discs only or are you replacing the pads? For pads I'd recommend Project Mu HC800.

Front:
http://www.hendyeshop.co.uk/project...s2000-civic-ep3--fn2-hc800---f336-25892-p.asp

Contact Hendy Performance on here, they may be able to offer discount or free shipping.

Could then get some Dixcel front discs, something like the FP. Or use Dixcel pads as well, but they cost more than the HC800 and from what I've read there's little difference.

You can get HC800 for the rear as well, I run them all round on my S2000, I'm very happy with them.

If you haven't already done so, have a good look at your calipers and grease them up if you have the kit.
 
You must log in or register to reply here.
Back
Top