- Messages
- 1,175
Hand brake won't tighten any more from the cabin 12 mm bolt has reached to the end now but still loose
does this mean new hand brake cables now ?
does this mean new hand brake cables now ?
EP3 hand brake
- Thread starter Hamza Type R
- Start date
- Messages
- 943
Loosen the handbrake cables.
Check handbrake levers on calipers are at rest position.
Pump brake pedal.
Adjust cables.
If the cables don't tighten one of the levers on the rear calipers could be seizing and not returning to its rest position.
Cables don't 'stretch' enough to run out of adjustment.
Sent from my iPhone using Tapatalk
Check handbrake levers on calipers are at rest position.
Pump brake pedal.
Adjust cables.
If the cables don't tighten one of the levers on the rear calipers could be seizing and not returning to its rest position.
Cables don't 'stretch' enough to run out of adjustment.
Sent from my iPhone using Tapatalk
- Messages
- 1,175
I recently I had my rear claipers fully refurbished,and I loosened the cable pumped the break pedal and tighten it up and it was good,after a month it became loose again now its fully tighten