EP3 Spoiler on EP2

[sonnyp]

Just as the title says really..

is this possible?

i bought myself a EP2 as a run around and have an EP3 spoiler in the loft!

i thought they had the same bootlid but saw another EP2 today and it seem to have an inch gap at the bottom bits of the side of each spoiler :/

Thanks!

 

[sonnyp]

i think this answers it

http://type-r-owners.co.uk/forums/showthread.php?87937-Tilted-Standard-EP3-Spoiler

 

[jimbothemagnificent]

Do you mean EP3 spoiler on an EP2?

Either way, I think they should be interchangeable.

 

[tom83]

Yes, but its not a straight forward change. I can't remember who, but somebody did tell me that you need to modify the EP3 spoiler to get it to fit an EP2.

 

[jimbothemagnificent]

Interesting, I wonder what the difference is?

 

[tom83]

I think it needs shaving underneath. I might be talking complete bullturd, but Im 99% positive Ive had this conversation with someone, and they said it needed modifying.

 

[sonnyp]

Yes the other way around,

EP3 spoiler on EP2..

Forum Fail

 

[drunknspike]

the rear window is different the sport has a smaller spoiler so doesnt have the last bolt hole on the spoiler the last bolt hole down the window needs cutting off dead easy to do

click spoiler vid on that page it shows wiring the light for it just skip to middle it shows what needs cutting hope that help

http://www.ephatch.com/videos/default/FlashVideoGallery.html
you need to drill a hole in the boot lid just small enought to pass wires through i cut the connetor off and re joined it as i didint want a big hole in my boot lid once fitted it put tigerseal in aroung the hole stop water getting in the boot lid pictures of what i did with mine how it sat on the car

 

[drunknspike]

also just cut a little bit off at a time to get fitment right and i used tiger seal where i cut off the bolt holes to stop the spoiler banging on the window as well also id use expandable foam in the holes

 

[sonnyp]

Thank you

 

[drunknspike]

pm me if you need anymore help with it