grinding from pulley

[akennedy361]

need help grinding noise from pulley area how much am I look at to get replaced sorry a quick post

Sent from my SM-N9005 using Tapatalk

 

[CR54WDS]

Hi, this bearing is easy to fit (you tube it) , it'll fit a non a/c as the top idler and the belt tensioner pulley below...

http://japserviceparts.co.uk/ntn-oem-aux-belt-idler-pulley-bearing-honda-civic-type-r-ep3-k20a.html

crowds

 

[akennedy361]

thanks for replying I might give it a go any tips

Sent from my SM-N9005 using Tapatalk

 

[CR54WDS]

Hi, just You-Tube it,

release the belt by moving the tensioner

undo the pulley, one bolt 13mm irc

pull bearing out with long bolt and socket on bench

push in new bearing with long bolt washers & socket

refit in reverse order

simples....

crowds

 

[akennedy361]

wicked job for today if bearing kit comes thanks for your reply

Sent from my SM-N9005 using Tapatalk

 

[AdamB]

I would look at replacing the auto tensioner pulley as well, I made that mistake in thinking it was the idler, it was in fact bearing movement in the tensioner pulley.

 

[akennedy361]

lil update still waiting for bearing to turn up but took the old pulley off and it was completely shaged

Sent from my SM-N9005 using Tapatalk

 

[akennedy361]

all done pulley bearing thanks crowds for link to a matter of 10 minutes now quiet as a mouse

Sent from my SM-N9005 using Tapatalk