Help track rods

[type r bamf]

Hi iam in middle of changing track rod ends when doing the nut up with the spilt pin how tight is it supposed to be doesn't seam to be going tight

 

[Norv]

The ball joint may be turning with the nut. Put a bit of pressure on the bottom of the ball joint with a jack and try tightening it after that. That lift will stop it turning so it can be torqued up.

 

[type r bamf]

Ok cheers is it a torque setting fir this or intill its tight ?

 

[Norv]

There's a torque setting for everything! But until it's tight will do if you haven't got the settings.

 

[type r bamf]

Ok cheers will have look in morning the nut felt like itvwas loose

 

[type r bamf]

done now thanks