How to fix really annoying exhaust rattle

[Civic Jord226]

As the title says,basically I've got a Japspeed de-cat pipe one of these one http://japspeed.co.uk/Honda-Civic-E...da-Civic-Type-R-EP3-Decat-Downpipe/p-5-1-161/ and since I've had it fitted it rattles and bangs against the body of the car underneath and its not the heat shield coz i had that taken off when i got the car,are there any after market exhaust rubbers that i can use that will make it hang a bit lower? Or if anyone else knows a fix for this please let me know!

Thanks in advance

 

[scabbytramp]

As the title says,basically I've got a Japspeed de-cat pipe one of these one http://japspeed.co.uk/Honda-Civic-E...da-Civic-Type-R-EP3-Decat-Downpipe/p-5-1-161/ and since I've had it fitted it rattles and bangs against the body of the car underneath and its not the heat shield coz i had that taken off when i got the car,are there any after market exhaust rubbers that i can use that will make it hang a bit lower? Or if anyone else knows a fix for this please let me know!

Thanks in advance

hey I had this and it got sold a few weeks later, noticed that it wasn't the decat hitting, it was the #2 o2 sensor hitting the frame, and in turn destroyed the o2 sensor too. the wires were shreaded ,
depending on if you have your spacer fix or not. you would have to let us know.

 

[Civic Jord226]

hey I had this and it got sold a few weeks later, noticed that it wasn't the decat hitting, it was the #2 o2 sensor hitting the frame, and in turn destroyed the o2 sensor too. the wires were shreaded ,
depending on if you have your spacer fix or not. you would have to let us know.

Don't thinks its the o2 sensor and i don't have a spacer mines been mapped,sounds like its where the de-cat pipe joins on to the B-pipe that's hitting the underneath but not sure :S

 

[scabbytramp]

put the car up front ramps. get a friend to rev it while you look under the car.

 

[Theshem]

I have the japspeed sports cat and have the same problem. Mine rattles where the exhaust changes direction under the body, it doesn't quite sit in the groove and because it's a larger pipe it sits closer.