will's Civic Type R!!!

[chop]

I've got the abp springs on mine which is about 30mm drop, wouldn't go any lower than that as my exhaust scrapes on pretty much every speed bump

 

[Will Emmett]

http://type-r-owners.co.uk/forums/s...ront-Bumper-Update**&highlight=Finally+Milano

There will be some pics here of a Milano with black wheels and with a dark anthracite colour too.

Get camber arms and bolts put on for the FRSU same time as the springs as you then only get the gio done once.

gio?? And I'm amateur when it comes to the mechanical side mate..will the camber arms better my handling alot??

 

[C4Doc]

geometry (sp) Basically the FRSU is the tracking and angle of the wheels. There's be a sticky at the top of the suspension section. It's a slightly more aggressive set up when the laser alignment is done for the wheels. A bit more camber.

The sticky will give you some good info.

 

[Will Emmett]

I've got the abp springs on mine which is about 30mm drop, wouldn't go any lower than that as my exhaust scrapes on pretty much every speed bump

Im debating getting TEIN or EIBACH springs they both drop 25mm front and 30mm rear..
ijust want it to handle corners better.

 

[chop]

I would go for the eibach if I was you along with spc camber arms