*Window Won't go up on the correct line*

[pez4]

Hi There,
Bought a CTR 2 weeks ago, one problem though is that the window on the drivers side will not go up fully and leaves a gap? Any ideas on the issue, I realise I will have to take the panel apart but if anyone has had the same issue then it will give me a head start!
Cheers,
Ben

 

[JamieC]

have a look at the rubber gasket, it may be twisted. Also try and spray some WD40 on the rubber gasket were the window runs up. It may free it up

 

[Griffin]

have a look at the rubber gasket, it may be twisted. Also try and spray some WD40 on the rubber gasket were the window runs up. It may free it up

I agree.

 

[pez4]

thanks guys..I'll give that a go!

 

[HASNIC]

I woudn't use WD40, a silicon based spray grease or some of the graphite/carbon based ones are ideal.

 

[gazep3]

I've just ordered a new rubber seal from the stealers £37 all in,as mine is knackered