Search results

Thanka for the reply mate, Should i go for the smaller 2.25" size or the larger 2.5"? Thanks, Ryan

Hi guys, Im fitting a spoon n1 backbox onto a 2.5" b-pipe, my question is due to the different ID's of each pipe what size of gaskets should i go for and do i need both a flat gasket and a donut gasket ? Thanks in advance, Ryan

Sorry forgot to add, there doesnt appear to be any leaks and the reservoir is full. Is there any other ways of testing both cylinders ? Ryan

Hi guys, Looking for a bit of help as this has been annoying me for a few weeks now and i'm no further forward with finding out what is causing the issue. It started when i was reversing out of my drive, put it into reverse and tried to move but the clutch pedal stayed flat to the floor like...

I had one and had to get rid of it. Even with the hydroshield in the rain it would want to stutter. Sent from my SM-N910F using Tapatalk

I've seen a few cars using carbon fibre sheets or aluminum sheet for doorcards think they are just riveted on. Sent from my SM-N910F using Tapatalk

Thanks for the reply, Hopefully the weather gets better and i can go have a look!

Hi guys, My car has been fine all week, but yesterday when i tried to reverse out of my driveway i found i couldn't select gears and my clutch peddle wouldn't return to its original position (its basically flat to the floor unless i pull it back up myself), I've done some reading online and...

Get them early next week mate, it's in a garage away from my house just now. They look good though well worth doing.

That story always get a few laughs lol, the guy did seem dodgy so maybe it was his way of saying i took this from another EP...

Couple of small updates, got my hands on some sabelt harnesses so these were fitted with my seats so the car could be mot'd. Also had a spoon n1 rep backbox fitted and split my headlight and painted the inserts gunmetal grey but they don't show up too well in the pictures because I was too lazy...

Yeh it's easy to get carried away spending on these cars!

Cars looking lovely, if your still after a seeker wing my mate is selling his milano red spoiler with genuine carbon seeker fin for £250. Hes in east kilbride as well so not too far away.

Can also vouch for GSM, very helpful. all my queries were answered very quickly.

Lol. Don't think so man, definately needs to happen. I usually go up rest and be thankful, campsie fells or the old military road toward faslane.

Looks a crackin drive, how's the new wheel?

Yeh its just like a van jimbo, its horrible. How did you find them Harvey? Comfy? cheers mate :) I just need to stop being lazy and actually fit the stuff i have.

You should do them all, you and the other charged red civics seem to be the highlight of a lot of people I spoke to's night last year, was amazing. Not got them fitted yet mate, hopefully next week :D

Couple of updates, collected some more parts for the car. Some corbeau club sports and some rails thanks to Jimbo and iceman Had my tanabe under chassis brace powder coated by my mate for free :D Before: After: And a Dc sports manifold which needs the flexi replace for cheapness :) And...

Should we expect to see this at the MU track night ?

Wheels looking good mate! [emoji106]

Pretty sure it's just a strong double sided sticky tape.

Should get a few guys together for crail. Would be a good laugh.

No worries mate, sound good!

Give me a shout if you need a hand one weekend mate, would be good to see what I have to do to mine.

So jimbo when are you up for stripping my sound deadening for me :P?

Actually the more I look at it, the more the carbon is growing on me.

Purple imo mate.

Pretty sure a Jxz80 is the chassis code for a supra.

.

Yeh mate, previous owner found bumper at the side of the road lol

Yup, standard supra Recaros they were an optional extra.

This happened today, I'm over the moon with it, makes an amazing sound.

That's from a supra that seat.

Only one or two pics up Jamie, lads are always slow at putting them up.

Looking good mate, I should really get round to cleaning my bay! How was the outsiders meet? Notice your car sneaking into some pics.

That would be great mate if I could grab that off you. Some of the cars that have been turning up are just nuts, there was a lovely yellow mk2 escort at the weekend. Sent from my iPad using Tapatalk

I don't think I'll make this week unfortunately mate, I'm away with work. I put some pics of on my build thread though from last weeks meet, you should check them out.

Thought I would but up some pics from last weeks outsiders meet I can't take credit for the photos but thought you guys might like to see them, wish I had got pictures from this week. There's was everything there from mk2 escorts to full blown drift machines, quality of cars was amazing.

Got some parts to fit that I've collected for some mega cheap prices over the past few weeks, First was the tanabe front chassis brace thanks to Tarmacnympth. Next was the spc camber arms from ctr-asch from over on the civic type r owners club. And lastly a tegiwa m from a guy on Facebook for...

Lol videos required when fitted. Also considering going silenced but don't want it to be too quiet.

Small update, fitted a hydro shield to my aem cai today. Took the filter off and gave it a good clean while I was at it.

Yeh I love how you can throw them into corners, totally different beast from the supra. Yeh there's some cracking roads around here.

I managed to save it kind of, could have been a lot worse. Nobody was hurt managed to limp the car off the motorway. I'm in Rutherglen so just next to Hampden stadium.

No worries mate, if you got Facebook you can check the group out.

I fancy making the type r quicker mate I'm loving driving it more than the supra. Happened in heavy rain. I was cruising at 70 and aquaplaned, the back end just stepped out and I lost it probably from inexperience if I'm honest.

Well guys I'm currently working away from home and got bored tonight so thought I would start a thread to track my progress on my ep3. I bought this car as a run around after writing off my supra but I've actually fell in love with the car so going to be keeping it for a while. Here's some...

Can't wait to see what you do with this, I noticed your in Glasgow now, you should pop down to one of the outsiders meets. They are every Sunday evening under the Kingston bridge, good selection of cars show up now and no boy racers which is a bonus :) Sent from my iPad using Tapatalk

So jealous, do you do all the work yourself I'm guessing mate?

You and the guy with the red charged civic seemed to be flying past just about everything.

Just went up to watch mate. My ep3 is pretty standard still :(

Car sounded and looked amazing the mu track night.

That's the same way I felt about the badges.

A lot of people don't mate the facelift ones anymore.

I have some spare I bought a while back similar to this.

Looks awesome mate! Noticed you were wanting some new black and red Honda badges, I have some lying around not sure if there any use to you but if they are you can have them, I'm in Glasgow too.

Wheels look stunning mate. What exhaust are you running? Sent from my Nexus 4 using Tapatalk

Hey guys in need of some help, I've just got some enkei rs evolution split rims but I'm not sure what wheel nuts to use? Is it tapered or flat seated? How do I tell? Any help is greatly appreciated! Cheers, Ryan Sent from my iPhone using Tapatalk

Hey guys, Looking to buy a hid kit but no really sure what's out there, any suggestion on which one to go for? Cheers, Ryan Sent from my iPhone using Tapatalk

Hey guys, I need a new set of wheels. So going to buy some rotas as it's all I can afford at the moment. Really can't decide on which style to go for just now, quite liking the blitz or the boost? What do you guys think and any pics? Cheers, Ryan Sent from my iPhone using Tapatalk

Hey guys, Quick question, do you dc5 rails sit lower than premier edition seat rails? Cheers, Ryan Sent from my iPhone using Tapatalk

Does anybody have any pictures of a Milano red with white or silver aftermarket wheels, preferably rota slipstreams or similar? Maybe even some polished wheels would be ace. Cheers, Ryan Sent from my iPhone using Tapatalk

Hey guys, I've just bought an omp Corsica steering wheel, I'm struggling to find a decent boss. What ones do you guys buy and where from? Cheers, Ryan Sent from my iPhone using Tapatalk

Thanks a lot mate great help! I found some already in an ep3 for only 20 quid dearer so going to go for them. :) Sent from my iPhone using Tapatalk

Hey guys, I'm about to purchase some dc2 seats on Ek civic rails. Has anybody altered these rails before to fit them into an ep3? Is it a hard job ? Cheers, Ryan Sent from my iPhone using Tapatalk

Hey guys, Just wondering if anyone knows of anywhere that can make custom coloured honda badges for the ep3? Cheers, Ryan Sent from my iPhone using Tapatalk - now Free

That would be great mate, please do. cheers, Ryan

been searching through countless build threads for images and really cant decide what eibach springs to go for? to me the sportlines that are supposed to be a 30mm drops looks alot more than that and the pro kit looks like almost no drop at all, im currently running rota slipstreams with a...

Laguna seca blue is lovely.

Hi guys, I have a set of tein super streets but one if the front struts is leaking, is there anywhere in the uk or even better in Scotland who can repair this ? Cheers, Ryan

Hi guys, I have a set of tein super streets but one if the front struts is leaking, is there anywhere in the uk or even better in Scotland who can repair this ? Cheers, Ryan

Anybody know any breakers I could possibly acquire the plastic nipple from?

Sorry was a typo it's a carbon wrapped bonnet but I do want the real deal :)

Well got myself a 51 plate ep3 it's got 115k on the clock but has full service history. Paint work isn't to bad but front bumper needs repaired as its cracked. Just going to use this thread as somewhere to track my progress. Current mods: crappy carbon bonnet Brand new rota slipstreams Tints...

Is nobody using the syvecs in the Honda scene ?