Apologies for the late reply. I have been very lazy but I also wanted to drive the car a few days before I report back. My car is standard. No mods whatsoever. Very quick and simple job and the cable was very slack to say the least. Definately improved for me. I can still feel a slight hesitation from time to time mostly when it's cold but once up to temp it definately is a lot smoother. I would definaly advise anyone to do this first before any other major costly work.
My EP3 has been stuttering and jumpy for the 8 months i have owned it. I decided it wouldnt hurt to check my throttle cable for play and my god it was slack! It even had a slight dip in the cable because it was so loose.
I tightend it up taking only 2mins of my time and all sorted. Make sure you dont over tighten it. It should be just enough so that the actuator doesnt lift. I cant believe the change. Well chuffed thanks for the post!
I can only hope more people read this.
Even if its raining get out there take 5mins literally!
10mm socket to take inlet manifold cover off
12mm spanner to undo lock nut
Simples!
Let me know what you think after. Out of interest is your standard or do you have mods also?
Hey, if you could put a guide up for this, that would be superb.