- Messages
- 143
I don't know if anybody know or help me with this, my car had done the gearbox upgrade with oem lsd and 5.1 FD in Tgm, they found in the OS driveshaft, there is intermediate shaft bearings, tom told me is not suppose to be that loose reckon it's finished..but by the time couldn't find me one in the workshop, so they have to put back to car until I get the part then replace next time..which I did..
During the test drive, the car is pulling right when put foot down. Tom told me to get alignment done, because I had a other subframe fitted to the car with arms fitted with ploy bushes with caster, the caster will change to angle a bit..hence causing car pulls right..which make cense to me..
This weekend, I sent the car to alignment centre done the four wheels again and adjusted, test drive and car feels the same, when under hard acceleration, the front will going right.
Now, will that be the intermediate shaft bearings in my car cause this happen? I hope I can get this sorted then I'll book my car for dyno tune, hopefully from romain
Cheers
Ray
Sent from my iPhone using Tapatalk
During the test drive, the car is pulling right when put foot down. Tom told me to get alignment done, because I had a other subframe fitted to the car with arms fitted with ploy bushes with caster, the caster will change to angle a bit..hence causing car pulls right..which make cense to me..
This weekend, I sent the car to alignment centre done the four wheels again and adjusted, test drive and car feels the same, when under hard acceleration, the front will going right.
Now, will that be the intermediate shaft bearings in my car cause this happen? I hope I can get this sorted then I'll book my car for dyno tune, hopefully from romain
Cheers
Ray
Sent from my iPhone using Tapatalk