- Messages
- 446
Fob programming procedure:Have you still got the full reset sequence please as I have the same problen
1. Turn ignition switch to ON position, marked II
2. Press the LOCK button
3. Turn ignition switch to OFF position, marked I
Repeat the process 2 more times, so 3 in total.
Next turn ignition switch to ON position, marked II. Press LOCK button and you should now hear the locks making a cycling sound indicating that the system has entered programming mode.
Press LOCK button again to program this fob. If you have any other fobs you must press the LOCK button on each, one after another and all within 10 seconds of each other (maximum of 3).
Turn off ignition and remove key. Test that fobs are now working.