Do you have an induction kit on yours?Tell you what I'm fitting my Spoon B-pipe and N1 saturday I will take a video of it in action and upload it. (hopefully my phone can handle the sound)That's some reassuring news Jermal.Lets see how louder she will get when I mate a Tegiwa manifold to the Spoon :twisted:
That's good news. I ordered it today from hendyperformance.The N1 makes a big difference over stock, but it's by no means unbearable.
Do you have an induction kit on yours?
I know what the problem is pal because mine did the exact same thing. Where the rubber fits to the steel bracket on body of car, there is an extra bit of steel (like a little lug), and the arm which is welded to your backbox just touches it. It's best if you get your car on a ramp and you'll easily see it then. I took mine to my mates garage and using oxy/propane he burned it off (bout 10mm). Not rattled sinceHope you can understand my explanation and can get it sortedGlad to hear it mate, love mine however Iv'e developed a vibrating rattle noise, It's not a heatshield type rattle, It sounds more like a metal on plastic, only happens at high revs letting off the gas........ puzzled, Im thinking its the standard mani but It sounds like It's coming from the back of the car so don't know, had a quick look underneath and it looks good....... somethings wrong somewher though
Yes mate as soon as I let off the gas especially higher up the rev range, it made a right bad vibrating sound. My mate burned off about half of the lug but still could hear the noise. Not as bad but it was still there so we decided to take the lot off and I havent heard it since. Hope you get it sorted palMafmaz your an absolute star mate and I hope your right, I will take my car to work friday, get it on the pit and find the culprit, so before you removed that piece yours would make a noise only when you let off the gas in like 4th 5th 6th gear, (ton plus) like a mad vibrating sound