• Registered users are encouraged to enable MFA/2FA to add an aditional layer of security to their account. More information can be found here: https://www.ncsc.gov.uk/collection/top-tips-for-staying-secure-online/activate-2-step-verification-on-your-email

Honda Jazz washer jets

Cosmic_Chi

Cosmic_Chi

Messages
1,142
I've ordered a set but would be helpful if somebody who has done this has pictures or could explain how its done would be very much appreciated:)
 
Pretty straightforward:

1. Lift bonnet
2. from inside disconnect the hoses from the existing nozzles, then push them through to free them of the bonnet
3. Remove the rubber pieces from the existing nozzles and place them onto the new ones.
4. Fit new nozzles onto bonnet.
5. Reconnect the water hoses
6. Test and adjust spray direction as required
7. Stand back and admire your handiwork

:)
 
i found the best method to remove the tube from the old jets was to give it a little wiggle as you pull
 
pliars are also quite handy to squeeze the retaining clips from the underside so the old jets can pop out.
 
I'm going to get some of these.

Has anyone got a part number for them and tell me how much they cost?
 
The Mrs drives a Honda Jazz so i did the knoble thing a husband would do,and thats relieve her of her jet washers and
replace them with mine .
 
I think I'll get some of these.
I have a lazy spray from the o/s washer jet.

Fan type spray would be better.
 
You must log in or register to reply here.
Back
Top