- Messages
- 222
Hey, So I bought a car about a month ago, £3995 1 owner, low miles, standard civic ep3 02
I came from an ep2 black aswell. as you can see from the picture below.
(the day I got it)
being a guy, I like tinkering, so what better way to spend all my money and time, on ! ( and the girlfriends )
so after purchasing it, I started with my styling,
I wanted a yellow/black theme (so to say)
and I decided I also wanted the Facelift look, being 02 plate - preface
so I started with my center console along with my dials L.e.D bulbs
I wont bore you with the pictures on how too's and how did's. ill just post after picture.
(girlfriend treated me too a Avh-x8500bt
I then decided to put the plastic surround back on, which im still awaiting to do.
I then done some dial surrounds
then I decided I didn't like my seats front . it looked weird black/red black/yellow so with the girlfriend stitching , and a few days (5)
later, this was the outcome.
which also goes well with my now yellow doors.
this one turned out better then the other one, as I used different size wadding.
while door card was off, and seat was out, I decided to do seatbelt.
i put on a new steering wheel, (not eveyones cup of tea,) but it actually a really nice wheel,
that was it for the interior at the moment
i didn't like ep3 pre- headlights so changed them too .
(but no pictures yet)
i replaced the back boot badge, (changed colour aswell) 8/10 rating.
i bought a de-cat pipe ... it was fun at the start, but then it became annoying, foot was down more, so was wasting a lot of fuel.
though the sound was nice, i felt more of a restriction then i did the cat being on.
so 6/10 rating, 8/10 being the cat!
ive also started trying to "tidy & sort my engine bay out"
and thinking about dumping my battery in my boot cause i have plans for a cold air feed all around!
my next step is to get my facelift rear lights in,
tinted wind deflectors,
calipers sorted, with all new discs all around
new cold air intake system
4-2-1 manifold
lightened flywheel
racing clutch. ( same time as flywheel)
k100
lowered
custom center console (my next project) for some aftermarket gauges
going to try do something with my dials
new wheels
strut bars
I came from an ep2 black aswell. as you can see from the picture below.
(the day I got it)
being a guy, I like tinkering, so what better way to spend all my money and time, on ! ( and the girlfriends )
so after purchasing it, I started with my styling,
I wanted a yellow/black theme (so to say)
and I decided I also wanted the Facelift look, being 02 plate - preface
so I started with my center console along with my dials L.e.D bulbs
I wont bore you with the pictures on how too's and how did's. ill just post after picture.
(girlfriend treated me too a Avh-x8500bt
I then decided to put the plastic surround back on, which im still awaiting to do.
I then done some dial surrounds
then I decided I didn't like my seats front . it looked weird black/red black/yellow so with the girlfriend stitching , and a few days (5)
later, this was the outcome.
which also goes well with my now yellow doors.
this one turned out better then the other one, as I used different size wadding.
while door card was off, and seat was out, I decided to do seatbelt.
i put on a new steering wheel, (not eveyones cup of tea,) but it actually a really nice wheel,
that was it for the interior at the moment
i didn't like ep3 pre- headlights so changed them too .
(but no pictures yet)
i replaced the back boot badge, (changed colour aswell) 8/10 rating.
i bought a de-cat pipe ... it was fun at the start, but then it became annoying, foot was down more, so was wasting a lot of fuel.
though the sound was nice, i felt more of a restriction then i did the cat being on.
so 6/10 rating, 8/10 being the cat!
ive also started trying to "tidy & sort my engine bay out"
and thinking about dumping my battery in my boot cause i have plans for a cold air feed all around!
my next step is to get my facelift rear lights in,
tinted wind deflectors,
calipers sorted, with all new discs all around
new cold air intake system
4-2-1 manifold
lightened flywheel
racing clutch. ( same time as flywheel)
k100
lowered
custom center console (my next project) for some aftermarket gauges
going to try do something with my dials
new wheels
strut bars