hi to everyone!
Let's me to introduce myself. I am JDM cars fan especially I like Honda.In the past I had few EF and EG chassis. But already 2 years I enjoy my Ep3 type R. I bought the car with few faults like engine warning and ABS light on the dash, badly painted wheels and few more.
But all that was't important because I knew that I can fix it. I started from general maintenance. Replaced all filters and liquids, ABS sensor and both oxygen sensors.
And the engine starts to perform how K20A2 should.I get 3 speeding tickets in 1 week and fine for agressive driving. After trip to Switzerland I understood that my brakes and suspension completely tired. I started from calipers.All sandblasted and powder coated.All seals and pistons are new. Also installed HEL brake lines, EBC YELLOW AND BREMBO PERFORMANCE disks all around.Also overhauled rear suspension. All powder coated and Whiteline bushes installed.
Also few bits from Hardrace
My front suspension still in the progress.I hope that next week I will get all parts from sand blasting. I will use Whiteline bushings and Boddyclub lower ball joints
My friend offered me Zeal Function x from DC5.I decided to try! 12kg front 10kg rear. The shocks are in good condition.I dismantled everything and cleaned.
I also decided to squeeze few ponies from engine.I replaced original flywheel with Exedy 8.1 lbs one, installed fresh air intake and ceramic coated Boddyclub exhaust
Remain to install the Hondavert chip and remap.I hope to get around 210BHP.
Also in the future plans to fabricate custom exhaust from Magnaflow components.
Let's me to introduce myself. I am JDM cars fan especially I like Honda.In the past I had few EF and EG chassis. But already 2 years I enjoy my Ep3 type R. I bought the car with few faults like engine warning and ABS light on the dash, badly painted wheels and few more.
But all that was't important because I knew that I can fix it. I started from general maintenance. Replaced all filters and liquids, ABS sensor and both oxygen sensors.
And the engine starts to perform how K20A2 should.I get 3 speeding tickets in 1 week and fine for agressive driving. After trip to Switzerland I understood that my brakes and suspension completely tired. I started from calipers.All sandblasted and powder coated.All seals and pistons are new. Also installed HEL brake lines, EBC YELLOW AND BREMBO PERFORMANCE disks all around.Also overhauled rear suspension. All powder coated and Whiteline bushes installed.
Also few bits from Hardrace
My front suspension still in the progress.I hope that next week I will get all parts from sand blasting. I will use Whiteline bushings and Boddyclub lower ball joints
My friend offered me Zeal Function x from DC5.I decided to try! 12kg front 10kg rear. The shocks are in good condition.I dismantled everything and cleaned.
I also decided to squeeze few ponies from engine.I replaced original flywheel with Exedy 8.1 lbs one, installed fresh air intake and ceramic coated Boddyclub exhaust
Remain to install the Hondavert chip and remap.I hope to get around 210BHP.
Also in the future plans to fabricate custom exhaust from Magnaflow components.