Ryan's NHBP USDM EP3 Type R

[Danger200]

My IP address has been banned :lol:

 

[D4N H]

anti-brits?

clearly a racist site.

 

[DA9_GSR]

Really? That's bullshit.

 

[DA9_GSR]

Got some goodies for the ride this winter:

- Buddy Club N+ Coilovers
- Buddy Club Roll Center Adjusters (being delivered)
- 0857 steering relocation bracket (being delivered)
- P235/40R17 Falken Azenis RT615K (for track)
- RSX-S PRB ECU with Hondata (being delivered)

 

[D4N H]

Tyres are crazy wide for an EP3!

 

[DA9_GSR]

Update:

Enkei RPF1 17x8 +45
Falken Azenis RT615K
Mounted and balanced and ready to hit the track!
Woot woot!

 

[DA9_GSR]

Update,


I WON'T be using those green wheels. They don't fit. Dammit!
I have JDM ITR front hubs and RSX-S rear in these pictures. I will
be installing JDM ITR rear hubs as well so the rear will stick out
just as much.




Overall Look with Brembo's

Front Tire to Fender Clearance
- with JDM DC5 ITR hubs @-1.5 degrees camber
- I want to go to -2.5 degrees camber

Rear Tire to Fender Clearance
- with RSX Type S (same as EP3 Type R) hubs @ -0.8 degrees camber
- I'm putting JDM DC5 ITR hubs @ -1.5 degrees camber

 

[DA9_GSR]

Update,

Last summer I installed the complete JDM DC5 ITR front suspension and Brembo brakes. Since the summer I've been piecing together JDM DC5 ITR rear suspension and brakes. This weekend I finally had the chance to install the rear suspension and brakes.

I thought you'd all want to see how my typical 17 x 7 + 45 CTR wheels sit with this setup. It's flush!

 

[Loxy]

Good update. They sit just right. :smt023

 

[D4N H]

Looks spot on.

 

[DA9_GSR]

Update:


- BuddyClub coilovers installed
- racing alignment is completed
- JDM bumpers, lips and skirts all installed


Here's a couple of photos from the lapping weekend.

 

[D4N H]

Nice work.

 

[DA9_GSR]

Nice work.

Thanks buddy

 

[DA9_GSR]

Here's a video of the track and me doing a couple of laps

[video=youtube;mRQ1dnYzp5w]http://www.youtube.com/watch?v=mRQ1dnYzp5w[/video]