Search results

Yep the bolts are to long or the adapter isnt deep enough. Packing the bolt heads with washers was my first thought but i might struggle to find ones that fit because the heads go down into the throttle body so will need to be exactly the same diameter Sent from my E6653 using Tapatalk

Im trying to fit a skunk2 throttle body along with mine but it wont tighten up to the tegiwa adapter plate with the gasket in, theres at least a 5mm gap all the way around. Anyone else had this issue and how did you fix it? Im thinking ill have to use like 3 gaskets or try to find some washers...

Yeah Durham Honda quoted me £70, I had it booked in to get the ecu changed and a spare key coded but they cancelled the ecu change saying they wouldn't want to do it on a saturday morning incase it went wrong or took longer than expected. Dunno, they don't seem keen to do the job. Sent from my...

Cheers dude Sent from my E6653 using Tapatalk

Hi, i fancy putting pre facelift rear light clusters on my facelift. Anybody know if its an easy job? Are they a straight replacement or will i have to do some wiring? cheers rob Sent from my E6653 using Tapatalk

You're right mate, my mistake. Grinspeed still closer to me but not as much in it as i thought Sent from my E6653 using Tapatalk

This is the current one, http://www.m2motorsport.co.uk/cgi-bin/sh000001.pl?WD=intake&PN=M2-RSIM-K20-73---M2-RACING-INTAKE-MANIFOLD-K20A-RBC-2475%2ehtml#SID=15 Sent from my E6653 using Tapatalk

Oh right Thats a new one to me mate, will wait and see what the new ones like. I need to save a bit of cash uo for it and a re map anyway. Anybody know if grinspeed do mapping? Having trouble getting hold of him and he is by far the nearest place that ive heard good things about...

Cheers dude Sent from my E6653 using Tapatalk

Are they? They are back in stock on the website but i dont know anything about a new model. Yeah those are the reasons everyone else has given me for buying one over an rbc, cheaper, no adapters, similar gains and no bending/cutting to get it in. Think ill wait and see what this new one is like...

Hi, just seeing what peoples opinions are on these manifolds. Im looking at getting either rbc or m2 inlet manifold, ive been recommended the m2 from a couple of people because they get similar gains to the rbc but you dont need to cut anything to make it fit. Anyway what do you think? Cheers rob

I've got a 4-2-1 but it isn't fitted yet. I was just thinking could I get someone to make a cheat pipe type thing with a cat welded in to go directly after the manifold just for mot time? Just like a centre section with a cat on the end, would it work?

I will be going to tdi north for a map when its finished, but until i save up for the rest of the parts i want i want this on. The k100 has been mapped already for cold air and cat back at tdi north apparently, which is what i have so should be good until i can afford intake and exhaust...

Hello, ive bought an ecu with a k100 fitted. My problem is finding someone to recode it to my keys. The only place ive found so far is honda durham who want 70 quid and have warned me if i go ahead with it it may wipe the map off. Anybody know someone reputable other than grinspeed or tdi...

Best get a second opinion, I haven't got that far yet. I've got all fluids, filters, discs and pads all round and a few bits and pieces waiting to go on mine. Was going to do it all today but I've realised I'm missing a few small bits like washers ect Sent from my Nexus 9 using Tapatalk

I think so but I could be wrong mate Sent from my Nexus 9 using Tapatalk

One on the sump drain and 2 for the gearbox, drain and fill holes. I haven't done mine yet I need washers still Sent from my Nexus 9 using Tapatalk

I got it from tegiwa in the end, I got a discount code from someone. It was 24 quid for 2 litres delivered Sent from my Nexus 9 using Tapatalk

Nylon ones ok or do people recommend using metalc Sent from my E6653 using Tapatalk

Thanks mate Sent from my Nexus 9 using Tapatalk

Hello all, I'm doing a service on my ep3 this weekend and I need washers for the engine oil and box oil drains. Anybody know what size they are? I can't take them off to find out because then I can't drive somewhere to get some more. Cheers

What's the best way to do that? I might change them anyway they aren't standard white ones. Sent from my Nexus 9 using Tapatalk

Right ive just noticed that the speedo on my ep3 will stop at a certain point and then jump and carry on as normal, ive also seen my rev counter do it but not sure how often because ive normally got eyes on the road. Anyone have any ideas what it could be? Vss or a dodgy set of clocks cheers

Is mtf 3 the same as mtf 2? Its for my ep3 type r, cheers

Hi, anybody recomend somewhere to get a couple of litres of mtf from? Cheapest ive found so far is tegiwa £27 Cheers

Nevermind ive just read the whole thread it says 2nd 3rd, should i take it off though? A bit of a faf if it doesnt cure it

Was I all gears or just some? I've got a tegiwa short shift in mine that was already fitted and when I'm shifting In to 4th on vtec it crunches every time but driving normally it's fine. I was thinking a new synchro but I might take the SS off and see if it helps.

Its not a proper trackday, its a short 15 minute session for 25 cars around croft. I doubt there will be instructors or anything like that just a drivers briefing. I thought it would be good for a first time taster sort of thing. Wont be going to hard i need to drive the car home at the end of...

Hello new to this forum and I'm thinking of doing a bit of track time in my ep3 at croft and wondering if anyone has any little tips for someone who's never done any track time. Cars got induction,scorpion cat back, short shift adapter, decent tyres and better discs and pads. Any advice would be...