Loosen the brake & clutch reservoirs, so that they are loosely hanging - this will give you the play you need to remove the cam cover at that corner.
Undo the plug cover, un-clip and un-screw all coilpacks and retaining bolts that hold the leads. Move these out of the way...
Slip off ARC breather hose.
Undo all bolts that fix the cam-cover to the head. It should lift off with a bit of force. If not take a thin knife and run it under the joins to cut/dislodge any gasket seal.
Lift off and replace.
What mileage have you done? As you may need a new gasket, depending on it's confition. If it's okay you can re-use your existing one. Apply some liquid gasket to all 4 corners you should see where it has been applied on the existing gasket. Then fit the cover ensuring that the gasket hasn't been breached etc. (make sure it's in the dedicated groove).
Replace everything in reverse order.
Job done
Undo the plug cover, un-clip and un-screw all coilpacks and retaining bolts that hold the leads. Move these out of the way...
Slip off ARC breather hose.
Undo all bolts that fix the cam-cover to the head. It should lift off with a bit of force. If not take a thin knife and run it under the joins to cut/dislodge any gasket seal.
Lift off and replace.
What mileage have you done? As you may need a new gasket, depending on it's confition. If it's okay you can re-use your existing one. Apply some liquid gasket to all 4 corners you should see where it has been applied on the existing gasket. Then fit the cover ensuring that the gasket hasn't been breached etc. (make sure it's in the dedicated groove).
Replace everything in reverse order.
Job done