Neily's FN2 GT

[Jermal]

You are a nerd.

:lol:

 

[newannaive]

Had a bit of OCD today, cleaned the threads on the petrol cap, they were brown with dirt and polished the filler neck

:lol::lol::lol: OCD 2009 Champion..!!

 

[rossy t]

good work on the brakes i think it looks great silver like you say OEM not in your face like red.

the petrol cap dirt removal. wow.

 

[SpaceMonkey]

Had a bit of OCD today, cleaned the threads on the petrol cap, they were brown with dirt and polished the filler neck

You need to stop reading DW threads & get a dirty laydee friend Hippy

 

[^Joe]

Nice mate, all round nice!

 

[Neily03]

DS2500s

Will be fitting Sunday weather permitting.

 

[N3YL B]

good work neily these work really well on my EP3

 

[Loxy]

DS2500s

:smt023

 

[Neily03]

Fitted the pads this afternoon and impressed myself by having it all done in 45 minutes. 8)

Only done about 20 miles so far but they feel well better than the Honda ones already. :smt023

 

[Neily03]

Took out the lights in the tailgate today to clean the mold/moss growing on the back of the top edge;

Before

During

After

Undoing about 16 tiny nuts when it's 2 degrees wasn't easy but worth it in the end.

 

[Loxy]

Nice one bud! Looks much tidier. :smt023

Jayne wants me to do hers now but I'll be waiting till it warms up a bit!

 

[AliA]

Good job .

 

[Neily03]

Nice one bud! Looks much tidier. :smt023

Jayne wants me to do hers now but I'll be waiting till it warms up a bit!

It's can be dead fiddely getting to the nuts and would be very easy to lose one forever inside the tailgate, you really need small hands for some of them so get Jayne to do it herself Also on the centre light (with the honda badge) you can't get the mold in the centre as the gap is only about 1mm so i sprayed some bathroom mildew remover in there and used a pressure washer point blank.

Good job .

Cheers.

 

[SpaceMonkey]

Looks much better mate, but why didn't you dress it with something before popping it back you wally?

 

[Neily03]

Looks much better mate, but why didn't you dress it with something before popping it back you wally?

What do you mean?

 

[cosmicremedy]

Good work, little jobs like that are always the most satisfying.

 

[SpaceMonkey]

What do you mean?

I'd of dressed it with something like AG Vinyl & Rubber Care before popping it back in mate. But looks alot better

 

[^Joe]

I'd of dressed it with something like AG Vinyl & Rubber Care before popping it back in mate. But looks alot better

QFT

Nice job all the same. worth it!

 

[Neily03]

I'd of dressed it with something like AG Vinyl & Rubber Care before popping it back in mate. But looks alot better

That doesn't make any sense, vynal and rubber care on polycarbonate? I normally polish it with AG SRP.

 

[SpaceMonkey]

That doesn't make any sense, vynal and rubber care on polycarbonate? I normally polish it with AG SRP.

In that case I apologise mate, I thought it was a rubber seal you cleaned.
Sorry Hippy