Search results

RPB are made using HEL components, everything is same :)

We stock them. The genuine number for EP3 is 30530-PRB-A01

We can do brand new for £400 delivered. If you would like to order please send payment to [email protected] ETA 2-3 weeks.

We have Fidanza's in stock so would be with TGM tomorrow if ordered before 1pm today.

All the quality drop-ins are very similar, we also sell Drag Cartel. After that I'd look at which set offers the best value for money, and on that front Skunk2 can not be beaten.

Do you have some photo's? I can assist in seeing if it is fake.

They will make around 260bhp on a happy dyno with the complimentary mods. Basically they will make similar power to all the other quality drop in options.

Fitting should be around 4-5 hours. Most garages should be capable.

We stock everything you need... Chain and Tensioner http://www.tegiwaimports.com/genuine-honda-cam-chain-and-tensioner-k-series-k20a-k20z.html Guides (not always needed) http://www.tegiwaimports.com/genuine-honda-timing-chain-guide-set-k-series-k20a-k20z.html Thanks

Such an 'incorrect' sweeping statement here...

Yes 100%, the Fidanza would be the one to go for.. http://www.tegiwaimports.com/fidanza-lightweight-flywheel-honda-k-series-k20a-k20z-3-6kg.html

Skunk2 do a specific FN2 spring set. Its a 30mm drop on a Type R. http://www.tegiwaimports.com/skunk2-lowering-springs-honda-civic-fn2-type-r-07-11.html Thanks

Yeah sure, we have them here.

If you live down the road from us then I'd 100% recommend Yellow Speed, I'd also get them fitted over at Brosport. Yellow Speed are the control coilover in Civic Cup and are TDI North's preferred choice of coilover in their Vtec Challenge car.

The K-Tuned V2 billet is on long back order, I'd possibly look at the K-tuned Hall Effect. http://www.tegiwaimports.com/select-car/honda/ep/engine-parts-oe/k-tuned-hall-effect-billet-tps-sensor-honda-k20a-01-06.html

Not the cheapest but the best http://www.tegiwaimports.com/skunk2-rear-camber-arms-kit-honda-civic-type-r-ep3-integra-dc5.html

These... http://www.tegiwaimports.com/ngk-laser-iridium-spark-plugs-honda-k-series-f-series-ifr7g-11ks.html

Seriously, sub 4kg is what you should be going for - like I said the Fidanza is perfect, so is the RPC (if you want to stay 1-piece). It does take a little getting used to, but by the time you have driven off your drive, and turned at the end of the road you'll be used to it. Quite a lot of...

Definitely a worthwhile mod while its all apart, it will also be better for the new clutch as it will have a fresh surface to mate to. Thanks

Go for ours, its perfect for daily driving.

Ep3 and dc5 are not the same.

We have genuine Honda fronts in stock, a lot cheaper than your dealer! https://www.tegiwaimports.com/catalogsearch/result/?q=Drop+links

The Energy ones are absolutely perfect, we have sold 1000's!

Its one of the best for clearance!

Absolutely spot on!

We have them in stock, they come with our heat shield https://www.tegiwaimports.com/catalog/product/view/id/5696/s/hks-rsk-racing-suction-intake-kit-inc-heatshield-civic-fn2-type-r/

Did well to find the pic!

Hahaha, drone* even.

Ours is perfect for daily driving and doesn't drown at any speed.

Our intake is really good, makes 5bhp over OEM which on a DC2 is good going. Our 'whale penis' intake made 3.3bhp the same day.

Our intake combined with an RBC - but the RBC will require tuning. www.tegiwaimports.com

Nice one, send us a message when you're ready.

Have a look at the RPC https://www.racingperformance.co.uk/index.php/flywheels/honda/k20/rpc-lightweight-chromoly-flywheel-honda-k20a-k20a2-k20z.html

Skunk2 are great! Arguably the best!

Around 50mm all round.

You'll find them both on this page http://www.tegiwaimports.com/civic-01-06-46-engine/ There are a couple of options for both in regards to colour (Skunk2) and tb bore (RBC)

Skunk2 Europe! www.skunk2.eu.com

Both produce similar figures with the Skunk2 just about edges it Skunk2 looks better and is already 70mm should you change the TB in the future. RBC is cheaper. We have both in stock!

We can do it for £391.50 FITTED inc genuine Honda parts.

You really need a new header as they require a little work to fit to the standard cat flange. It can be done though and we charge £55 to fit them to your car.

We are Skunk2 Europe, but we don't have any specific photo's Google seems to have some EP3_07.jpg

Energy for the engine mounts Powerflex for the gearbox mount We always carry both in stock.

Our is about the best you can buy apart from going TODA. They are in stock too!

We have all this in stock - www.tegiwaimports.com

OEM EP3 CTR donut gasket for the backbox is 2.25" - we sell them!

Yes its genuine Honda...

Thanks, we always carry at least 20 pairs in stock too :)

We always have these in stock guys!

Thanks

Ours fits the bill

The standard opening on the RBC is less than 70mm

We also sell 70mm Skunk2 throttle bodies :) But to make the most of it you will need to port match the RBC

We have just developed a velocity stack which will once dyno'd hopefully make our airbox the BEST available. See facebook for more details.

It's something we might incorporate on our website in the future. Thanks

Hi You are missing a clamp. Sorry about this. It will have been missed at the factory. Can you email [email protected] and I'll make sure this gets sorted on tuesday. The part should be with you Wednesday Thanks Johnny

We do these two. They are £37 posted for the pair http://cgi.ebay.co.uk/TEGIWA-THERMAL-INTAKE-GASKET-HONDA-CIVIC-TYPE-R-EP3-RBC-/170600830328?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item27b89a1578...

If it was our airbox you were looking at, then you were looking at the UK's best selling intake (currently). It has been proven many times over now. Johnny

Looking at all the pictures now i dont think the height of the mugen will be an issue. But the J's the bar does look as though it sits slightly forward from the shock turret. the cusco looks to sit directly above like the Mugen

http://t1.gstatic.com/images?q=tbn:ANd9GcTp9lm75iYHS2ik63vT03kpGS2DLl4LAIZeHvyCyUQ3DjTescMa&t=1 Looking at that it looks like it should fit. The Mugen brace seems to fit higher than the cusco no?

http://www.tegiwaimports.com/eshop/store/eshop_viewItem.asp?idProduct=1409 This.

this is the insert

www.tegiwaimports.com We do one that is specific for the GruppeM / Tegiwa Airbox

GruppeM / Tegiwa Proven countless times over the years Zero risk of hydrolock

We do ours for £260 delivered See this thread We will soon have the inlet gaskets too which will make the total £280 delivered

http://www.tegiwaimports.com/eshop/store/eshop_listCategoriesAndProducts.asp?idCategory=152 Only a few things listed, send me pm with the things you need

Cool - pretty quick shipping!

We had XYZ on our EP3 for over a year - and they have been great

If you can organise a group buy i can do them in any colour I would need 10 minimum per colour and the price would be £45 each I could also do the coolant hoses in matching wierd colours for £35 extra So £80 delivered for matching 'orange' for example, intake and coolant hoses

http://www.tegiwaimports.com/eshop/store/eshop_viewItem.asp?idProduct=1313 I havent a fitted picture sorry They sit right behind the rear seats so if your sub box is vertical then it wont interfere Thanks Johnny

Its a Carbing replica - and the fit is perfect We ship worldwide too

We have these in stock now www.tegiwaimports.com Leezer you have PM

Or PM me :)

Of course

We do a similar one - www.tegiwaimports.com

I think the insert will be good - but you will still have to modify We could easily have produced the Fibreglass scuttle but it looks rubbish We even looked at OEM injection moulded one but it would have bumped the price up £150 per unit People who have bought this kit knew full well what...

I dont see what the big deal is - most people dont even use the GM supplied part as it looks terrible against the OEM plastic We will so have the insert so that you modify your self and dont have to send it off

http://www.tegiwaimports.com/eshop/store/eshop_viewItem.asp?idProduct=1353 Just updated the website - and the new batch will come with a decal

Thanks

Yes - see the picture

Everything apart from the modded scuttle is available on www.tegiwaimports.com And for the scuttle there is a service for £25 on CTRO Thanks

If you order off the website NOW you get.... Airbox & Breather pipe extra you NEED Modded scuttle - We will have our insert possiblly when they arrive And optional Induction hose (its not needed)

Next batch is due on the 7th! Only 35 though and 15-20 are already accounted for

It shows the potential using these parts

From CTRO - Dyno was done on 4th June @ TDI North

yes it will

We do know about it The kit also doesnt come with the scuttle The next shipment will include a formed silicone pipe especially made for our airbox, however the price will increase to £325. It was a genuine mistake as the DC2 Intake comes in an identical box (apart from a sticker) and we...

www.tegiwaimports.com

We do one for the EP3 - see the retailer section We also do the bushes

Have you seen the TEGIWA intake? www.tegiwaimports.com There are a few reviews over one civictype-r.co.uk

Have you seen our TEGIWA intake? www.tegiwaimports.com Thanks

Any chance of having our own section? We have lots of parts for the EP3 now so it would make sense Thanks

Great write up Lottie!

If you can wait 6-8 weeks our GM replica will be available for less than £300 delivered

We have one out on Friday See the retailer section

Exactly.... :)

It wont be identical. But close enough, and it will not say GruppeM on it

We will have soon - i will update the thread asap

Errrr NO

Again but probably after FN2 Johnny