Search results

hi folks, am trying to fit an AEM UEGO A/FR Gauge but am struggling to find a place were tho fetch the Lambda sensor through the bulkhead/firewall. theirs a nice looking rubber boot that takes a load of wires through in the rear right corner of the engine bay about were the back of the ECU is, i...

not sure when your greenlight renewal is due but i just got mine. the original renewal quote was 572 but they offered me and alternative quote off 497 with a new company. This new company doesnt offer trackday cover for 50quid per event. but if you ask the bloke nicely at greenlight he phones...

Are you totally sure we cant persuade you into Championship White???

that'll be something like this then???

if your wanting a hand with visualising the finished item i made a 3dCG model a while back. i can easily repaint it into any colour or make any wheels etc for it so you can play about with ideas before you spend your hard earned cash. just let me know

can anyone tell me what the sensor on the top of the TB is and what it does ( not the map sensor) its the one with a small rubber hose coming off it. thanks

so will 7.5 x 17 fit under the ctr's arches???/

im after getting a 2nd set of wheels with some trackday only tyres for a bit weekend fun. the tyres im after come in 235/40/17. will these fit on standard 7x17 rims and more importantly will they fit under the CTR arches????? Ive got tein coilover fitted so i should have little extra clearance...

please see here http://trackdayracing.co.uk/phpbb2/viewtopic.php?p=2511#2511

thats what i set my to but havent been able to fully test it yet. roads are way to damp to fully give it a decent launch.

lesson learned with that one then. wont be dabbling with it any more. leave it to someone who knows what theyre doing. i think ive got it all back up to normal. ill get paul to check it next time im down at systemR

i know this might be asking a lot but can i mail you the map. and you can check it for me????

better go check it again then. anything else major i should be looking for???

hmm. it starts and runs fine. could it be a bug that it was programmed using an earlier version of KManager???

i got myself a laptop and deciced to have a look in the Kpro to see if i could get my head around it all. i was looking in a few of the windows and noticed that the injector size seems to be HUGE. ive done a search and found that the strandard size is 350CC (?) the pic taken from my ecu...

anyone got it enabled???? and if so what you set the rev limit too????

chhers mark. i know were i can get some of that locally

thats not exactly cheap considering im only going to use about 8 inches worth of it. ill see if some of my mates who go rallycrossing have anything that will do the job

ive just bought beaumonts backbox of him and am waiting for the powerflex mounts to arrive but i was thinking of putting supping heat resitant tape on also just to be on the safe side but an finding it hard to get a supplier??? anyone got any links???

a nice how to chris. decided to give a go this morning. only took me half an hour and am chuffed with my hard work. i didnt have any wire wool so i used some t-cut ( seems a little more abrasive than the autosol ) on a cloth before using the autosol to finish it off. got a little carried away...

finally found the problem. one of the studs between the cat and the manifold had sheared. when i looked yesterday id the to parts of the stud were still in place so it looked in 1 piece but today the bottom bit must have virbrated/worked its way out. managed to get the top part of the stud out...

thanks i will do. sorry if i seemed in a but of a fluster. if its gonna go pop so be it. itll fix. kind calmed down a bit now as you can probably gather.

wish i could. i let my cover slip with the warranty. ill probably have a lot more time tomorrow night and i can go around to my mates again and get it up on axles stands and have a proper look at everything. itll no doubt be something completely stupid but its just got my ar$e at def con 1 at...

i thought that too. but its all fine and dried out now. ive been as far under as i can and cant see any holes in it or anything im thinkin it might be the flexi joint between the cat and the manifold but why should it only do it on the move??? and wouldnt it put the cel light onf if i had a big...

would the waterpump go after ony 22k??? and why doesnt it make the noise when the car is stationary . i can rev the nuts off it and its fine. i do have anaftermarket mainfold but its onlt a dc shorty one with the standard cat in place so its pretty much similar to the OEM one in realtion to...

cheers mods. was in general chat about 10 seconds before it got shifted. oil was checked last week and it was fine

sorry for posting in the general section but im a bit worried something might go pop. ok. ive got a very strange noise when i was on my way home from work all of a sudden a weird noise started form under the bonnet. it sounds a bit like a belt slipping or a very high picthed flutter. i...

i know it cant just vanish i just wasnt to sure if the ABS wheels sensor was mounted on the OEM calliper or mounted to another part of the hub

im toying with the idea of going big with a stoptech kit. will this do away with the abs???

im considering a decat soon but im not sure what happens if i get cauhgt without one. about once every 2 months the local police have random stop checks were they pull vehicles in and let the vehicle inspectorate have a look at them. ive been stopped this year in the works van for a cheak over...

nice piece of kit.

did you pic your car up last night mate?? i was in getting some stuff done yesterday morning. mark and paul were showing me your charger. 1st time ive seen one in the flesh and it looked well impressive. well i wouldnt complain about just short of 300 bhp. think ill need to do the brakes ...

nah it wasnt tom. id have recognised him.

i was at system-r yestaerday getting paul to tinker with a few bits for me when a lad came in with a ctr and asked mark if he could come outside to have alook at his ctr and give him some advice. i thought nothing of it and chatted away to apul . about 10 minutes later mark came back in and says...

you more than payed me back by your navigation skills. other wise id have been lost loads of times. although if we get the change i wouldnt mind a lap videoed if we can squeeze it in. and i definatley want a go in your stripped out rocket

thanks

ive managed to purchase on from the classified section. has anyone get some ide of how much it wieghs so i can get a price so i can get it sent to me

you still owe me a lap for free well cheap anyway. or was i just your international chauffer when not on ring tarmac???

well i managed to spot myself and the others on the outside of the corner . i take it that was the formation flying down the hill picture 2 or 3 of us managed to get.

1 read your policy and see if it says if your covered for ' declassified toll roads' 2. depending on how old your car is. im guessing you have a ctr and its less than 3 year old. ie it still has a warrenty. then the honda assist is valid and will recover you/fix you in europe. you might...

im really tempted to join you guys again. when is easter next year??? is it early or late???

is it worth getting k pro on standard equipment. ??? at the moment all i have is an injen CAI. im planning on an exhaust soon but im trying to find a friendly MOT tester up here 1st before i go for the toda manifold decatted route. is it worth getting the kpro 1st or should i wait and get the...

ok my mistake. guess thats what you get for being a lazy git. might go for the full supersprint setup then. i really dont want to be having to put the stuff OE stuff back on once a year to get it MOT'd

ok ill put my hands up and admit i can be bothered doing a search on 'THAT' forum. im thinking of getting a JR manifold and keeping my original CAT and want to know what back box to go for. i ideally want quiet but dont mind a bit of noise ot high revs but would like a bit of power if possible