Search results

Cut from vinyl sitting on a rear/quarter panel window. Could be fun.

yay. So I picked up a 2001 Acura CL Type S the other day and was curious did Honda put a J32A2 into any cars over there? I know it's basically Inspire coupe which i think had a J32A1, but those made around 35hp less. Nothing wrong with the car, but if i wreck it I'll have a reason to j-swap my...

Follow this link: http://store.carbonfibergear.com/3m-...on-fiber-vinyl Choose the 4x8" sample sheet with free shipping. It'll arrive in a few days in a regular envelope in the mail. It's just enough to cover both interior handles if you angle them on the sheet, so make sure you place them...

DIY Volvo Lip (1990-1994 VOLVO 740 N 940) [borrowed from ephatch.com] Tools Needed: Screw gun Screw Driver Utility Knife Sharpie Heat Gun 3/4" Self Tapping Screws Jack and Jack stands Volvo Lip Step 1: By using the two original holes in the lip center on the bumper and mark with arrows...

Basically, if an intruder lifts the hood the horn will go off. If you want your horn to blow when someone pops your hood when you arm it, proceed... Supplies You Need: _Push button Normally-Closed Momentary Switch (part number 275-1548 @ radio shack) _Open/Close Switch (whatever style you...

This a post from ephatch.com but his video's are so awesome i felt the need to share them. From what i understand he's on a boosted k24 swap. weltall > jono and his donkey (the fullrace chronicles) well since tomarrow its supposed to rain here...

This thread was created in an effort to help keep us organized, and to be of service to anyone who needs not only the EP3 manual, but also the manuals of the cars most commonly used for swaps into the EP. As many links as possible have been consolidated into this thread. Some of the links are...

Ok first you are gonna need to make sure the clutch fluid reservior is full. It is located in the top right hand section of this picture. Just to the left of the red portion of the bong there are two reserviors...the one we are working with is the smaller one of the two. During the entire...

Torque Specifications quick reference thread. Everyone needs this...well almost everyone. Suspension Tire Lug Nuts 80 ft/lbs Front: 12mm top nut (1) 33ft/lbs 10mm Strut tower Flange Bolts (3) 33 ft/lbs 16mm damper pinch bolts (2) 115ft/lbs 10mm tie rod nut (1) 32ft/lbs brake hose bracket (1)...

Ok, first of all, all of this information was researched by me and the selection of parts was researched by me. Feel free to do your own research and select your own parts. There are way better parts, better computers out there, but if you want you can copy everything that I have done and I...

Tools required: 1. Special Funnel with tube tip OR Hand pump 2. 3/8 Ratchet 3. 17mm Socket 4. Cheater Bar/Breaker Bar (For more Tq) 5. ~3 Qt MTF (OEM, GM Synchro Mesh, etc) 6. New Crush washer (If Old) 7. Jacks and Jack Stands 8. Tools to remove tire 9. Drain Pan Step 1: Gather all your tools...

Pic has the info.

DIY:S2000 Start button Submitted by Accordexcpe95 Material: S2000 Start button Wires floppy drive plug (optional) Tools: Wire cutter hot glue super glue any cutting tools -First you need to take out the center console. (if you don't know how.) -take...

Below is a pic of the two wires you cut and wire together. It is right at the top of the clutch pedal...you can't miss them. There is a green and a black wire going to this plug on the right. Cut them and wire them together...I just used electrical tape cuz I'm ghetto but you can get fancy on it...

Got this done tonight. It took about 2hrs from start to finish, which includes removing and re-installing the bumper. Pic of the product as requested. (Comes in a plastic bag for $14.99 or so USD) Can be gotten at most hardware stores I'd imagine First, remove the bumper. There are DIY's...

First off, hello to you all. I found this site in my search for information on how many EP3's were built for the US market from 02-05 Si's. I spend alot of time on www.ephatch.com, which is basically the US version of this site. Yes those of us unfortunate enough to live in the US could only...