• Registered users are encouraged to enable MFA/2FA to add an aditional layer of security to their account. More information can be found here: https://www.ncsc.gov.uk/collection/top-tips-for-staying-secure-online/activate-2-step-verification-on-your-email

K20 FTW.. Essentially, more JDM than a Tsunami

Right, thought I'd just add a few of my favourite pictures taken from last weekend whilst away in North-West Wales with the missus, hope you enjoy :)

DSC00480-1.jpg


DSC00193.jpg


DSC00196.jpg


DSC00223.jpg


DSC00330.jpg


DSC00332.jpg


DSC00334.jpg
 
Last edited by a moderator:
i thought you weren't allowed to fit a tow bar to CTR? is that like a massive curtain pole ring on the back?
 
Ah it's just a towing eye as apposed to a bar. I don't "tug" anything with it, it's merely for aesthetics but would have a purpose if I took it on a track day and ended up in the gravel pit lol
 
^Joe said:
Nice mate, where in NW wales did you go? Caernarfon?
Click to expand...

Very well spotted!! Caernarfon was one of the places we went to yeah :) Visited all over the place in that region over 4 days, was a good trip, mainly castle viewing though haha

C4Doc said:
Nice, have some 20mm Tein's on the way from James @ Touge in the container.
Click to expand...

That'd be these then, you won't be disappointed :)
 
Tein FTW, yours have settled nicely man; mine are getting there too.

I wanted to go lower, but if mine settle like yours have done: I'm content - more settling required for mine I guess :cool:

Nice pics, what decal is that above the tailpipe exit, it's hard to make out. Not exhaust related, yet, is it - as your running stock right?
 
TypeRiter said:
Tein FTW, yours have settled nicely man; mine are getting there too.

I wanted to go lower, but if mine settle like yours have done: I'm content - more settling required for mine I guess :cool:

Nice pics, what decal is that above the tailpipe exit, it's hard to make out. Not exhaust related, yet, is it - as your running stock right?
Click to expand...

Yeh they have settled really nicely, am really happy with the overall drop now :) Yet I'd expect when yours settle completely that your rear end will sit a bit higher than mine as I've got around 100kg of I.C.E. in the boot :D haha

And thanks dude, I took quite a few (to the noise of "why are you taking MORE pictures of your sodding car?" from the missus) but they were the ones I liked best :) In terms of the decal, it's not exhaust related, I just liked the way it looked sitting directly above the exhaust. Not to mention that it's reflective so looks really cool at night too :cool: But it's the moto for J's Racing: WAZA. Can't remember it's exact translation, but I'm sure google will be your aid if you're intrigued enough ;) hehe
 
TarmacNymph said:
Yeh they have settled really nicely, am really happy with the overall drop now :) Yet I'd expect when yours settle completely that your rear end will sit a bit higher than mine as I've got around 100kg of I.C.E. in the boot :D haha

And thanks dude, I took quite a few (to the noise of "why are you taking MORE pictures of your sodding car?" from the missus) but they were the ones I liked best :) In terms of the decal, it's not exhaust related, I just liked the way it looked sitting directly above the exhaust. Not to mention that it's reflective so looks really cool at night too :cool: But it's the moto for J's Racing: WAZA. Can't remember it's exact translation, but I'm sure google will be your aid if you're intrigued enough ;) hehe
Click to expand...

:lol: I don't think mine'll be settling any lower then man - I forgot, you were carrying the equivalent of a large dead body in the back :p LOL. For what it's worth it looks better for it, though. Nice and low.

I might consider going lower if these don't settle at the rear more - but then they've barely cover 200 miles/been on the car less than a month, so I'll see what the situation is like in a few good months/miles.
 
TypeRiter said:
:lol: I don't think mine'll be settling any lower then man - I forgot, you were carrying the equivalent of a large dead body in the back :p LOL. For what it's worth it looks better for it, though. Nice and low.

I might consider going lower if these don't settle at the rear more - but then they've barely cover 200 miles/been on the car less than a month, so I'll see what the situation is like in a few good months/miles.
Click to expand...

Yeh I'd give it a while, as I seem to recall that mine took around 4 months to settle properly :) Yet if you're after more drop after they've done so then I can only assume that coilovers would be your next step :?

Oh yeh, have you sorted rubber for those uber yummy round pornographic jobbies yet? :cool:
 
TarmacNymph said:
Yeh I'd give it a while, as I seem to recall that mine took around 4 months to settle properly :) Yet if you're after more drop after they've done so then I can only assume that coilovers would be your next step :?

Oh yeh, have you sorted rubber for those uber yummy round pornographic jobbies yet? :cool:
Click to expand...

I'm all for the slammed look, but being a semi-daily driver, I can't afford to catch my lip on some of London's finest speed-humps, and pot-holed roads, particularly if I'm looking at sourcing a gen. Mugen Lip as my next mod; after the wheels are mounted.

The Teins'll be fine I reckon, if they settle a little more - I'll be chuffed.

My next mod'll be my road tax :rolleyes:

then tyres, work lugs and valve-stems are in the pipeline.
 
TypeRiter said:
I'm all for the slammed look, but being a semi-daily driver, I can't afford to catch my lip on some of London's finest speed-humps, and pot-holed roads, particularly if I'm looking at sourcing a gen. Mugen Lip as my next mod; after the wheels are mounted.

The Teins'll be fine I reckon, if they settle a little more - I'll be chuffed.

My next mod'll be my road tax :rolleyes:

then tyres, work lugs and valve-stems are in the pipeline.
Click to expand...

In which case might I suggest to just sticking with the springs? ;) hehe

Ah road tax, what an event that will be!!

So you sourcing the lugs etc from Touge?
 
TypeRiter said:
I'm all for the slammed look, but being a semi-daily driver, I can't afford to catch my lip on some of London's finest speed-humps, and pot-holed roads, particularly if I'm looking at sourcing a gen. Mugen Lip as my next mod; after the wheels are mounted.

The Teins'll be fine I reckon, if they settle a little more - I'll be chuffed.

My next mod'll be my road tax :rolleyes:

then tyres, work lugs and valve-stems are in the pipeline.
Click to expand...

My Mugen lip (replica) comes very close without any drop. Will be interesting once i've got the teins on. Should still be able to park it up the kerb down my road.
 
You must log in or register to reply here.
Back
Top