Search results

Hi Guys Had both my bikes nicked last night :(, looks like they were after my bikes specifically. The bikes are both pretty distinguishable Giant XTC (2011) Giant Trance X (2009) If anyone wants anymore information let me know and i'll send you a spec over.

Well managed to actually take a few photos yesterday after giving it a bit of P21s Wax and Klasse AIO on the saturday, usually the weather is crap when I get the opportunity. :( only lightly modded for now. ;)

Anyone know any dealers around Herts, Beds, Cambs that definately do ECU swapping and key recoding? I know Priory Bedford used to do it just seeing anyone could recommend anywhere.

Can anyone whos running a DC Race Header shed some light on how much distance you have between the race header and the front anti-roll bar? I'm sure my header is now knocking on the anti-roll bar, I've got the rear ESMM fitted. Haven't had a chance to get under the car and have a look, but...

Anyone know where I can get the latest Sat Nav discs for the X1R, I know they come on 2 discs now, had a look on a few torrent sites :oops: and the links look pretty much dead.

Just been out to check my oil and I can't get a clean reading from the dipstick, theres splatters of oil up the dipstick above the max mark so I can't see the true level of the oil. (And yes I have cleaned the dipstick. :D) I flipped it over to see if I could get a better reading from the...

My passenger side window has decided it wants to pop out of the seal when you close the window. :shock: I can get the window back in ok if i push the window in when I close it but I suppose I better get it replaced before the weather gets crap again. Anyone know how much Honda charge to fit a...

Anyone know a cheap place to obtain a backbox to midpipe gasket, I phoned Honda up today stupidly thinking this wouldn't cost me more then a tenner, and get greeted by a price of £21 exc VAT. :shock: Is this the standard price now? The chap at Honda thought it was rather high as well.

Anyone know of anygood wheel refurbishers in or around the Hertfordshire/Bedfordshire area, I know about Wicked Wheels and Chipsaway but was hoping to get them done for around £200 and both the above options Im looking at £65 + VAT which bumps it up to £300. Ideas welcome. 8)

I bought a headlight off someone off the CTRO as my headlight adjustment motor is shot on the passenger side, recieved the headlight the other day its different to a CTR headlight, there doesn't appear to be headlight adjuster motor built in? Plus the deflector in the headlight is different to...

My passenger side headlight adjustment motor has been knackered for a few months now, if I was to obtain a new headlight would I need to replce the whole light cluster or can I just swap the motors round, I haven't had too much of a look at the area around the light apart from to pull the power...

Not sure if this is related to the AEM, but noticed last night if i accelerate up to Vtec point and then let off the accelerator slowly I get a wierd sucking noise, almost like I have a dead cat stuck in the filter, it happens around 5000rpm, my vtec point is 5500, I haven't noticed any...

Can we have a restriction on people who haven't posted say 50 /100 times from either seeing the classifieds or not being able to post classifieds? This seems to work on other forums and would stop the influx of 1 posters from coming on just to sell things without contributing. 8) Oh and...

Well my passenger side has gone, probably because I hadn't touched the adjustment for about a year till yesterday. :oops: Anyway, I've unplugged the connector to the headlight for the motor, will this be ok till I get a chance to get it fixed? I've wrapped both connectors with electrical tape...

Anyone know of a good way to remove scratches from the black section of the dashboard, I've got a few that are quite visable and wouldn't mind having a go at removing them if its possible. :wink:

Where is everyones biting point? I don't know if its me being paranoid but the biting point on my car seems to be very high, almost at the very top of the pedal, its been like this for a while, the car seems to still go ok with no performance loss, although the high biting point is getting me...

I've managed to lose the tool Carl gave me for my internal hex wheel nuts, anyone know what their called and where you can get one from? Looks like a big allen key. Ta. :wink:

Anyone know anywhere I can get hold of tuner locking nuts for KEI Velocitys, I had a look at the PRI Racing site as I was interested in maybe getting some Mcgard Spline Drive nuts as well. I've spied some Mcgard Tuner locking nuts on there, would these fit? also they seem rather pricey does...

As the topic reads, I need to find the cheapest place for some Yoko Parada Spec 2s in 215/40/17 need them fairly quick as my fronts are on their last legs. :wink:

Just been out to see locate all my rattles, I've now developed a rattle someone near the steering column which sounds like a click which gets louder the more miles you do, I've got a rattle on the drivers side door when the window is paritally open, and I've got another rattle on the dash near...

Strange title, just wondering if anyone elses Spoon N1 puffs out air when you turn the engine off, its a slight spluttering, I'm not sure this is a problem with the exhaust as I can vaguely remember this happening with my old Topgear system, am I being paranoid? 8)

Seeing as we're starting a fresh I thought I'd upload some picutres of my CTR. 8) Some of the interior ones I took when I got the car a few years back. :wink: Outside Headunit Inside Engine