Search results

hi i don't want to start new topic as it is the same :D i have upgrade my ECU with Kpro, my ep3 is stock with hondata airbox mode and fujitsubo rm01a, it will be fine to run it with "k20a2 stock calibration" (from kmanager) or i need to remap it?

in Poland it is "normal" thing to run 4-2-1 (DC sport, tegiwa, japspeed) without mapping/hondata... some car's are running without it for year or two... but i'm not a big fun of it...

thx for info !!

is it safe for engine to run without mapping after adding exhaust manifold?? i have dc sport 4-2-1 waiting to fit...

after some research i bought new tyre set :) evo 8 wheels were sold... back to oem enkei... don't know what about color of them... now they are silver... what do you think - blue, gunmetal, anthracite, black?

ep3 is my daily car... i like to enjoy every drive... dry / wet ... i'm planing to do some trackday at 2x Brno this year ... PS4 or PSS... PSS should be warm up before drive fast??

great car by the way :D why not OEM quality FD? cr-v 5.33

just swap... ohh and you will need to check milage on jdm...

i have to buy new tyres for my ep3... running evo 8 wheels, 215/45 would be my size choice... -MICHELIN PILOT SUPER SPORT -Michelin PILOT SPORT 4 -ADVAN Neova AD08R -POTENZA ADRENALIN RE002 price tag is almost the same...

i have d2 coilovers setup for oem height of car... on 215/40 it's ok, firstly it came with 225/50 and yes they rub rear arches, i'm after some 215/45 or 225/45...

oem ep3 wheels (et45) need 10mm spacer and longer studs, i'm now running evo8 wheels (8" et38) without any spacer... as with fn2 it would be the same story... oem wheels will need 10mm and longer studs

EVO8 wheels :D 215/40 tyres

first offroad ep3 :D 225/50R17...

swap rails from ep with some welding ;)

new wheel :)

have someone with tegiwa/gruppeM in LHD ep3?? i want to change my injen CAI for something more "safe" ;)

hi i bought JDM EP3 cluster, and it don't have rear fog light switch inside... i check with my old cluster ale antifog rear works on it... have any one cluster diagram??

no flashing imo light after mapping :D with my FD 5.33 and 4,5,6 from DC5 190km/h will be ok :D :D i pay for it £18 ;)

new parts :D DC sports 4-2-1 manifold from cplracing.co.uk and JDM cluster

360ccm from S2000 will support 270hp ;) on moded ep3 (ported rbc, tb72mm, 4-2-1, 2,5" cat back = 250hp oem ep3 injectors were working on 95%, after change to 360ccm from S2000 they are working on 75-80%)

k24/k20 can rev to 7.800rpm... if bottom is bone stock ;) if bottom is in good condition you will be looking at 245-250bhp... with kpro/k100 ;) after adding RBC + tb70/74... catback 2.75-3" some aftermarked cams like toda a3 it will be 275bhp ;) in poland it is more common to see k24/k20 ep3...

some of progress: fujitsubo RM01A catback D2 racing coilovers poly bushes in suspension brembo calipers from clio rs with adapters by k-system.pro + 324mm x 30mm brake disc oem 5.33 FD from CR-V oem LSD new set 215/40R17 potenza S001 wheels painted in bronze waiting to be fitted: DC...

this one's? its only for winter, and they are very strong wheels ;)

it was like in this pic, and still it was damp :( CAI is next in plans

retrimmed :) AEM was damp after driving in rain, filter sits in wheel arch and at corners it take water from spining wheel :(

less than 400km to magical 120k km so small gift :P

wheels are painted with gloss or matte finish?

Yes :)

i'm looking for good color for nhb and yours looks great, don't know the name of color so i ask :P

best lsd ever :P nice car btw :)

very nice ep :) thoes are powercoated wheels?

and 6th gear :) this may help: (red gears are JDM EP3)

first thing, ep1,2,3,4 have the same floor so you can bolt on seats from ep4 on ep3 without any problem, second to answer your question you will need rails from Premier / 30th ep3 recaros :)

i have had kn kit, now oem box with hondata mode and for me it isn't loud, you will don't hear difference, but vtec crossover is more feel than hear.

its fake low max?? looks really nice

its under black plastic, holes are at the back of gauge, and you can't see it :)

i switch kpro with ori ecu and i never have this problem i have that (drop to 500rpm) only when iacv on tb was dirty, cleaning it will help

from drivers position i can see yellow glow on bottom of gauge :P

my set, oil pressure & temp.

color is the difference, in ep2 it is almost black glossy finish, and in ep3 it is like honey matte finish :) ep2 sport grill: ep3 grill:

Aem V2: after week of testing it, i pull it out. after driving in rain i notice that filter was damp / wet and it worrys me a lot :(

does anyone with aem v2 notice water damp/wet filter after driving in rain?

i have similar problem, at lights it goes for 400-500rpm, cleaning iacv help for 2weeks, after that i change iacv module and it is normal right now :)

any plate diff: gripper, kaaz etc

CTR 2004, 68750 miles, own for 2 years 6250 in this time :)

great work :) I renovated my the headlights by wet sanding them with 800, 1000, 1200, 1500, 2000, 2500 then polish it with makita 9227CB and menzerna FG500, 3M yellow and 3M blue paste :P

did someone have tegiwa / gruppeM on LHD ep3?

i have a question, can i put jdm cluster (red line 8400, 180km/h no immo light) on eu ctr?

Hi this is my ep3, 2004, 100160km on clock in time of buy, now 104000 :P Engine: RRC Manifold Hondata modded airbox Exterior: Interior: FN2 Seats JDM back seat Skunk2 gearknob AutoGauge gauges Center console in 3M carbon

seat rail were made for them, not perfect but they work :) (side plastic from seat is touching car plastic. photo)

ok, i fited them myself :)

yes

i have a question is it safe to run rrc / rbc on k20a2 with hondata airbox mod without tuned ecu (kpro - k100)?

Braid safari, one mate in ep3 is using it in winter :)

main is gone too :( did someone buy OEM honda clutch from tegiwa on ebay? it cost nearly half price of it in Poland :)

did someone fit them in ep3?

Hi my ep3 is on VR1 10w60 at this time, would you suggest different oil for Poland climate? i will not lie, i put foot down a lot :)

anyone know if SFS will fit OEM airbox and RRC? after 2 weeks, oem hose break on TB :(