Search results

I would of let you seen mine but sold my car 6 weeks ago. I think they look great but only if you have a gp kit or mugen kit I don't think they look right with oem bumpers.

I used him for my map he is good. I'm sure I had 34 logs all together I quite liked waiting on a new map and going for a drive, the loud and slow one is a bit mental lol.

The side light casing is the bigger 1 of the two they are in the same case as low beam. Just pull the plastic holder and it will pop out, the driver side is harder though you need skinny hands. I think you are in the wrong casing mate I think you might be trying to replace you main beam lol.

This was a boys on civinfo wasn't it? n2bby or something? It looked realy well with the lightings on it. Realy nice car you have bought though I seen it at knockhill last year at japfest it has been well looked after. Your car used to look like mine by the way before the mugen kit went on lol

It was July I last posted here and how things have changed! My misses is now pregnant and I have just bout my first house!! I'm going to need a zefira at this rate lol.

Nice vids ash, your car goes through the gears pretty well☺

Looking spot on mate very nice

I got mine from eBay only 20 bucks or so and works great

Mines hardly ever comes on only realy in icey conditions. I take it you haven't been nailing it up to roundabouts and jumping on the anchors? Lol

Nice, how much of a difference will the final drive make? Take it its shorter?

Pay for what you get mate, better saving and getting an hks or something else. Your car would probably run better with the oem setup that that thing.

Yeh older cars like R5 GT turbo and escort rs turbos all had turbo lag, I couldn't see newer cars being to bad nowadays.

Goodyear f1s are amazing very good grip in the dry or wet

I would of thought so as long your not lowerd to much, it would help with the hard ride a little but I wouldn't think it would handle aswell.

Nice motor mate love the reg aswell[emoji3]

Looking good mate, lucky you getting to clean your car I can't wait to clean mine think it won't be till Mon or Tues though[emoji20]

Cheers mate, you wouldn't say that if you seen it now it's bloody black as!!! Don't think I will have time to clean it this weekend aswell[emoji20]

Nice bit of kit, bet your looking fowerd to getting your diff fitted.

Cheers mate, very kind of you[emoji14]

There's a how to on Civinfo on how to raise the clutch biting point, I have the same problem when going into second in vtec. This has helped a good few people so might be worth a try, I'm going to do it when I have time.

Already done a swop on another forum mate sorry.

Well got rid of my HKS RSK and went for a Tegiwa intake which I done a swop for over on Civinfo. When I went bk to oem I first thought my vtec wasn't working it was so quiet lol, now the box is fitted it's a tad louder but it feels a lot better also had a tweak to my map for fuel by vitviper...

Hks is good and sounds amazing! The only time you would get heat soak is when sitting in traffic a long time due to the temps under the bonnet rising, once moving the temps would go right down again and if you had ducting and a heat shield it would work even better. I am changing mine for a...

Stunning ep3 mate.

Aye that's definitely the best way

Went to Crail on sun with a crew from ESCC( Edinburgh sports car club) had a great day but was really windy. Stole some photos off there fb page and thought i would post them[emoji1]

Cars looking great as always mate but I must say I'm a sucker for the yellow wheels you had on before[emoji1] Love this pic!!!!

That's looks the nuts mate[emoji3]

Nice one mate glad it all went well for you. Bet it's killing you sitting below 4k lol.sounds good about the turbo I will keep an eye on your threat[emoji6]

Cheers bud, ah I see I will try bend it first but if it still there I will probably do the same.

Got a bit board today so made me a DIY heat shield for my rsk. I do have a little rattle up past 5500rpm so will need to put a bend on the plate up the side but I ran out of time because me tee was ready so that's a job for the weekend.

Well done mate looks great, hard isn't it lol. I don't usually have the shakes but when I started that it was unreal[emoji1]

I done mine like this, as said above a small paint brush and steady hand.

Fekn he'll that's a lot!! I have just started to get into my cleaning. Here's my rather small collection compared to yours lol Also got snow foam and a hd lance aswell[emoji3]

Well map is now complete with vit in a total of 34 revisions , I am very pleased with how the car drives now the crossover into vtec is very smoth and it pulls nicely right up to the limiter. I am now thinking of changing my intake to cpl or skunk 2. I really need to get my finger out and...

That looks rather smart bud I like that, I haven't seen matt red before.

Aye that's a bit of a sh it er for you but at least you are getting it sorted. Take it your turbo plans are on hold for a while now then?

They are great tyres I just fitted 4 myself and I'm over the moon with them[emoji3]

looks tidy mate welcome

cars looking realy well bud love the seats they look great.

nice gauge, I take it the s3 intercooler is alot bigger than standard?

Yes mate its an etune, his feedback speaks form himself mate,I dont know if you are a member on civinfo but everyone raves on about him there aswell. The differences between a dyno and etune by him will only be a couple of bhp if any mate you will never notice it. Theres been a few boys on...

He is based in America mate, The remap is done via datalogs using your flashpro(You need a flashpro to get a remap ). You will go out and do a 20-25min run(normal driving) with one 3rd gear pull from 2k untill 8.5k, save the datalog to your laptop and then dowload it to his site. Its very easy...

I'll second that! im just about finished my tune with him we are working on knock counts now then that will be me. The difference is like night and day and thats only with an hks rsk.

yes I bought a cheap ebay one and this is what it looked like after around 9months I have just changed it for a genuine mugen one..........pay for what you get;)

still think theres alot more to come so I'm not getting to upset.

your car will looks mint when you get them fitted!! looking forward to seeing it.

Good stuff glad you got her fixed.

I dont think it looks that small, it looks like it sits infront of the estate so in comparison to that would that not be the size of an average hatch back?

Shes always got a smile on her face:p

Cheers ash, I am rather fond of my knob:D

Haha funny that when she jumped into the car and felt it she said oh thats a nice knob, I'm beginning to think that she have plans lol. Misses F already has her heart set on a mini, only problem is we are saving for a house aswell. I said about a jazz but she just laughed at me:)

They do look good:)

Cheers, lol dam straight that could be your wee treat when you sell your ep3;) just think with your mugen front/rear splitters and the wing plus the lightning alloys it will look ace!!!

I love the look of the mugen wing, it totaly transforms the rear of the car I love mine:p

Stunning mate

Got a wee bit of mugen from a fellow member on civinfo yestarday. and fitted

very nice it does look very clean

cheers mate, I'm going to get frs aswell, only hear good things about it.

Try coxmotorparts, I think they should have the things you are looking for.

nice one!! dont see many of them going about, its the same age as me lol.

very nice mate nice and clean, welcome.

Dam wildlife:eek:! I get paranoid about deer running infront of me as it happened to a mate of mine once and it left a right mess of his car. Good you are getting your car sorted though Trixi nice one;)

very nice mate, hope you have deep pockets:)

Thank you very much kind sir:) I am very pleased with the car so far, I am thinking of putting winglets on the front aswell but I go on and off the idea like hot and cold water lol also the mugen rep bonnet. only problem I have is my wife still uses it for her work lol. I realy do need to get...

very nice mate and great work so far well done.

Nice golf mate, I have always liked them I was actually going to buy an 09 Gti but ended up with my fn2:p I still have never had a turbocharged car yet but think my next one will have to have a turbo on it:D

Hello and welcome, very nice car you have there and sounds like you are enjoying it since you have had your gear box sorted. Great work so far well done:)

You should have a vtec light on the right hand side of the dash next to the speedo when vtec is engaged aswell, standerd vtec should come in at 5650-850ish cant remember exactly. You should definitely feel and hear when your car hits vtec(should have a kind of bark) if not check your oil is ok...

Goodyear Eagle F1s (2) you can pick them up at a place called camskill for 86 a corner just now which is realy cheap. super grip in dry and wet.

Out with the old In with the new:) Was bugging me for ages that! happy I changed it, the oem is cheep s h i t. I like the suede leather it goes will the seats.

welcome buddy:)

thats the best thing to do;)

Not necessarily, it does have cleaning agents in it so its good for your engine ( thats why I use it) some people say it makes there car run better with more mpg sharper throttle response and so on. Personaly I never noticed much difference at all. However if you go down the route of getting...

I always use v power but thats just me, they run fine on both.

very impressive figures!! not usually a fan of the bug eye scoobies but this one is very nice:)

gold look good on milano:)

no worries, aye we are actually due one at the end of this or next month lol. Have a look at the future meet section its in there bud;)

cool no problem, good luck with your build keep us posted.:)

I'm sure theres a few boys on here with turbo ep3s, think theres a boy from falkirk aloa area with a turbo milano one on here aswell but dont think he has been on for a while, have you had a look through the build threats to give you some ideas? Aye that would be good fun:p

Send him an email buddy about your questions regarding the turbo, I'm sure he will point you in the right direction. He rebuild a k20/24 fd2 on civinfo now running 300bhp n/a its an absolute belter!! it just won best modified car at japfest this year aswell.

Triple H in Irvine will map your car and he is ment to be realy good with hondas, theres a few boys on civinfo that has used him and recommend him highly. also I would say performance HQ in dalgety bay in Fife also but you would need a kpro ecu first I think. Haven't got a clue about your turbo...

Great looking car buddy, love the old yellow oem track wheels and some realy nice photos on track. I realy realy want a track car!!!!:D

very nice indeed.

no problem buddy will do, should have it by Wednesday.

lol, I just bought the black suade one with red stitching. was desperate for one.

nice one cheers

mines is fooked aswell, where do you get the leather ones with red stiching?

When I first got my car it had budgets on the front and all it done was understeer! got falkens for the front put the budgets on the back and then the back end went out all the time at low speed! now I have just bought 4 goodyear eagles f1s and all my problems have gone, I would highly recommend...

welcome buddy

I bet that will sound good when you get it back, I dont think I have seen throttle bodies on a k20 before.When do you get the car back? bet you cant wait.

very nice mate and a nice list of mods to get you going:)

love ek9s!!!! my wee bro just got rid of his for a r6 the silly bugger

good fun isn't it lol.

was the AEM not designed for the civic si in america and hks was designed for the fn2? I'm sure I read that at some point.

I have never had a problem with flat spots on my hks, I am in the process of getting a remap by vitviper though.

nice got to love a milano dc2

I stay in fife mate.

Yeh its much more louder in real life. I already have ducting from the front bumper cause I done the standard airbox mod before I got the hks.My plan is to make the heat shield and add a little more ducting to where the heat shield will be so when I travel it will hopefully blow in a little more...

here you go:p http://youtu.be/gi1wNx0Fp9I