Search results

10.976 @137.73 Well many many congrats to Guy from CPL Racing http://www.cplracing.co.uk I know a lot of effort has gone into the Car which is still not 100% Complete but things are looking good, First EP3 Civic in Europe into the 10s this was done at Shakespear Raceway on a very very iffy...

Well for all the people that said CPL were only good for Turbos and superchargers well a new 1/4 Mile record was set by CPL Racing for a NA Civic this Civic is running a Stroked K20 Engine built by CPL, and also CPL Racing Spec Cams The car ran fully loaded all seats in in road trim, running...

http://www.sxoc.co.uk/vbb/showthread.php?t=260434 Stolen from Driveway These are rare in these parts so somone must have seen it noticed it round here, I know the guy who owns it to talk to as he has been embaressed by my Civic in the past :) Gutted for him, someone must know where this is?

Yup people you heard right 12.062 thats twelve point ZERO six two Many congratulations to Scott Whitelaw, in the CPL Racing prepared Honda Civic for his record breaking run, also backed up with a 12.1 later in the day Many many congrats, looks like the other big power Civics *cough*cough*...

Went to final Jap racer event of the year, and probably last drag racing event this year for the final round of the Jap Racer series. Weather was superb and Guy and myself were allready standing 1st and 2nd place in the standing. Plenty of people came to the event including a Toyota...

Well Eggum Racing have gone 7 Seconds for the 1/4 Mile in there Civic Ohh and yer its driven by a young Lady as well Video here if anyone is interested :- http://www.zshare.net/video/nyce1s-com-presents-stephanie-eggum-nhra-fall-nationals-2006-wmv.html Also Matt Keller of Inline Pro...

Had some extra work carried out on my car last week in anticipation for Japshow all work carried out by CPL Racing www.cplracing.co.uk I allready had a 8psi Jackson Supercharger and was running 287.1 BHP @ the flywheel (Graph below) It was decided to carry out a few modifications that...

Well car has gone in for its 2nd MOT this morning, wish me luck. Tried as a test to run it with the Jackson Header on Monday but no such luck failed on emissions, changed the original CAT over on Monday afternoon and it's gone in for its proper MOT today hopefully all will be well...

Ok I know that various people recommend oil 5-40 0-40 etc etc as per Oilmans post but would running 10-60 Castrol Racing oil be ok, I know its going to take longer to walm up etc etc as its a little thicker than normal oil, but wont having too thin an oil mean a loss in oil pressure ? Just...

Well its been done, Guy Chamberlain from CPL Racing again pushes the boundries and goes 12.5 Seconds (in his black development Civic) The car is Runs the following for people that are intersted Toda Header Toda Cat Back CAI Filter IPS K2 Cams Quaife Diff Clutchmaters Clutch Hondata...

Well I think the time will speak for itself 11.3 Seconds @ 128 MPH Done today in the Final of the Japshow at Santapod :P CPL Cars finished First, Second, Third, Fourth, and Fith Ohh and before you ask there was competition :) Ohh yer I didnt do to bad either :) Fastest...

11.6 Seconds @ 126 MPH Was done today in the second round of the Jap Racer Series, many congrats to Guy I know he has been working very hard over the last couple of weeks with some late nights to get this car ready after a clutch problem at Rotorstock but with 505 BHP we all knew it could do...

Ok after seeing various car fitted with Race Seats buckets etc etc I got a few questions ? Ok first thing is, with Rails I know there are various ones, which ones allow you forward and backwards slide movement none or all ? next obviously race seats (like the ones I want) have no tilt...

Well Results are finally in :) 1st Ryan (Devils EP3) 2nd Me :) 3rd Guy chamberlain CPL Racing Thats a CPL Racing 1,2,3 :) Cant complain really obviously wihout problems Guy would have won the event without problem :) Full Results here...

Today at Shakespear Race way managed a 13.22 Seconds at 111.80 MPH pulled a 2.22 60ft all on Street Tyres Dont think there much left in it to be honest as was doing 13.2 second runs time after time :) with a couple 13.3 thrown in and then messing about some 13.5 Seconds Without getting...

Doing yet more web reaserch well thats what I call it I came (not literally) across her :) Erm she drive a Top fuel Dragster :) and she got a name like a Porn Star I mean what else could you really want :) http://www.draglist.com/artman/publish/daily_stories/article_001641.shtml

Well the day started yesterday if you know what I mean, stripped the car ready, well back seats out and spare if you want to call that stripped not as stripped as some other`s still keeping two seats as I think this is written in the rules somewhere. Loaded the car up with my Dunlop DJ01 Semi...

http://ndra.nopi.com/2005/kd_dsp_racer.cfm?vrid=218 This is her Website http://eggumracing.com/ Look on Crew and Driver looks better with Dark Hair :) I think im in love and she looks like she put some of her winnings towards Twin airbags :P ohh and she is 24 :) She now...

Recently had the side wall split on a Federal Tyre, luckily was not driving at the time or didnt notice but following day was totally flat as a pancake. Basically the side wall on the inside edge of the trye had a 2-3 cm split in it, which seemed to follow a banding line (if you know about...

Ok daft question but has anyone got pics of the range of Carbon Bonnest available fr the Civic EP3 Please Looking for one with possibly some vents in, also an idea of price and suppliers please :)

Ok guessed it was time to post a bit about my motor Engine - Jackson Racing Supercharger 9 PSI RC 650 Injectors Hondata KPro AEM CAI Induction Kit Jackson Racing Manifold Top Gear Custom Exhaust Hondata IMG Heat Shield Spoon Sports rad cap Mugen Oil Cap Energy Suspension engine...

Well where do I start, trip down on Thursday morning to CPL in Sherness started out at 5.30 am and arrived at 9.00 am :) Firstly we had to gett eh car MOT`ed was due in a week so decided to get that done while I was down there, fitted charger on Thursday, fitted standard header and CAT back...

Right I know that when Guy and Herts62 had there chargers on they were running a bit of Gas for cooling etc etc :) Looking at the USA most of the Drag racers seem to be spraying :twisted: Question is and im sure some of the technical gurus will fill me in, but when my chargers fitted how...

How much Oil do I need for a complete change on my Civic Before I dont buy enough or order tooo much :)

Well finally changed my back pads, to some nice Red Stuff ones :) After I had worked out that the brake cylinder actually screws back and not pushes back with a clamp we were on to a winner :) Bit fiddly getting the caliper back onto the disk but all managed after a bit of fiddling, also...

Ok anyone know anywhere in the UK where I can buy some 2" gauges (to fit the old Ledonski Group Buy A Pillar) think there 50mm ish holes Would require Oil Pressure (I know you need a plate that fits between your filter and the engine believe the Greedy one is prob best) Also want Oil...

I have posted this before and Honda tell me they looked at it and its fixed, but I got a deffinate humming noise at over 125-130 MPH I have explained this to the Honda Dealers and have said ill take the tech out and show him :) But just wondering what it is think its a wheel bearing if...

Well time I posted about my car and some pics :p Mods as follows (I will Prob miss some) Jackson Racing Header AEM CAI (Induction) Hondata Flash #4 E-Tech Strut Brace Quife LSD Helix Group N Racing Clutch Exedy Flywheel TP Earthing Kit Energy Suspension Engine...

Ill start by posting a quick link to Carls N77_CEJ site http://www.thequartermile.co.uk Lots of videos and info on there Also the challenge has been set :P http://www.thequartermile.co.uk/qmile_challenge.htm