Search results

nice job done on the damage butty

love the capri , what engine was in it ?

nice mate , like the work you put into the brake refurb

have you checked to see if the bulb holders are in place , they are thin wire clips which are a pain to refit so yours maybe missing , dont think you can buy these from dealer as they come as part of the light .

looks nice mate

anybody got an idea what this could be , just fitted brembo disks and and brembo pads , all good for a while but now every time i touch the brakes dont matter if its a slight touch or burying it to the carpet , i get a clunnk from the drivers side , now ive changed the carrier/slider bolts and...

oh mate you must have got loads of patience , enjoyed reading all the hard graft you have put into this , if i do a simple job like an oil change i feel nice job that saved a few quid rather than having a garage to do it , so i bet you must be well chuffed with how far you have brought this car .

there is a guide in the how to section on this , my advice is to have a look how the other side is held on , its a bit tricky to describe how to do it .

5 red H for the alloys recieved today thanks mook .

yeah i might be wrong , but im sure that once this film starts to form , and then its removed i think the protective coating is removed in the process , like i say i could be wrong , but hey at least you got them looking new again .

black with the gold wheels looks a good choice .

did you have to put some sort of sealant on them after to stop the film coming back on them .

great looking car , as you said i bet it looks nice when its clean and the sun shines down on it .

5w40 fuchs titan race pro cant fault this oil , opie oils will sort you out for this , its what most members on here use .

nice job on cleaning your car mate looks way better , those lights polished up nice too , going have to do my lights they got that horrible **** on them like yours had , have tried the toothpaste method but it wont shift it all .

hi mate looks in good condition , love these in black with the recaro seats

might just be old oil dripping from around the oil filter , if it wasnt cleaned up properly , give it a good wipe and then check for leaks .

nice mate i love the yellow stitching on the seats and the yellow belts , very nice work .

sort the the brakes and stuff first you ****

not much butty , have you got a honda on here

hope the type R sign on the cam cover takes off

[/URL][/IMG]

[/URL][/IMG]

cat back scorpion thats all i can afford , nice sound thou .

[/URL][/IMG]

hope you like

[/URL][/IMG]

[/URL][/IMG]

get one now butty , i not been on here for a while so im strugling lol

also its sealed butty

done by bren mate , top job tells me im the first to ask for the design

just seen this , god there are some noooobs about

Went for a scorpion cat back 4in slash Resonated not to loud .

What torque should no 15 be the one with a thread on top , bottom right corner , also cos ive had to change this bolt would i have to undo them all and do them all in sequence or is it ok to just change the required one !

If any mods can step in to help would be very greatfull , thank you

Nice mate , i just fitted new cat back zorst and refurbed cam cover to my cosmic

Hello and welcome , nice !!!!

Also my cam retainers got numbers on them and they not checking with the diagram you posted

Something not right though mike cos mine as only got 21 bolts

Thanks mike

yeah there are 6 of the bolts in question plus about 10 other bolts but these dont have the thread on top to hold the cam cover in place , was wondering if these are all the same torque and if the torque is what stoneyni above says .

Not saying your wrong mate but there are different bolts holding the retainers in place , so are they all the same torque ?

was also wondering what torque should this bolt be tightned too , i know the top that holds the cover in place dont need alot , not to sure how much for the end that goes through the cam retainers .

Hi all , right i managed to snap a cam retaining bolt today while changing the rocker cover , so i broke the top off that come through the cam cover , so back off with cover to remove the whole bolt , went to order new one from lings honda and the bolt i require as two part numbers , 5 bolts for...

very nice

Just used this guide to do my gear box oil and engine oil and filter change , thanks made things very easy

Looking to change gear box oil , do i need any washers or are the bolts fine to go back as they are? Thanks for any advice

Opie oils £80 inc vat for front disks

Looks nice mate , nice job on the wheels

Nice mate , best colour .

Very nice

Thats a nice car you have there. Enjoyed looking at this thread .

Nice car , where did you get the side light bulbs from they look good , love the air freshener

£90 a tyre , was happy with the price

Bet it sounds nice thou

Front tyres thats what i got to get today , 2 continentals will be going on the front . Your car looks nice mate .

Nice shine on your knob , lol , good choice of colour

I would buy original honda ones pal , i bought a set of bosch ones from halfords lasted 6 months , not happy .

Had my wheels refurbed makes a big difference .

Paint looks nice and bright in the pics . I know what my misses would say if i asked her to put a shine on mine . :)

Nice pics , love the wheels . Id like them for mine .

You'll never get that stool to fit .

Have a look at mine , page 6 .

Nice and clean , love the nhb .

Changed my bulbs for some LEDs , used this method . Takes a little force , and they will slide to the side .

They look good , nice job on the finish too .

Looks nice mate , imo i would get rid of the red handbrake cover etc , it looks like a cover for a rampant rabbit .

The honda gear box oil is good enough to use , you will need a lenghth of pipe and a funnel .

£55 for strip of led's hope mine never fail .

Cant he just buy a replacement bulb ?

Yeah common fault , when the weather gets a bit cold the starter motors seem to do an extra turn , nothing to worry about its been talked about a few times .

Lovely looking car , love the pics with the light effects on the first page

I know the place , i had my wheels refurbed down in afan discount tyres , my brother lives in cwmavon , is wife got the physio place on the main road

no sorry mate i dont know it , but they were done local to me and i cant fault the finish .

What part of maesteg she from mate , where are you from ?

Why you trying to find it boss , have you just realised that you had a stash of something nice tucked under the seat ?

Astra or focus

I've enjoyed reading this thread , its made the afternoon shift go a bit quicker , fair play to you mate you 've had some patience with this car , looks nice thou , i like the brake kit you got on there .

that looks a bad smash , glad your misses walked away from that with just mild whiplash .

Looks very nice and clean .

Looks nice boss

Where you from mate im from maesteg , great looking car however i dont know if i would have stuck with it given the faults you have had , i use to have a 172 , came with its own swimming pool in the boot , other than that it was faultless , my mate had same prob with his , only use to happen...

Welcome butty . How do you rate the new discs and pads ?

Nice car pal !

Ok mate , will get better pics posted , after seeing yours painted it kicked me into getting mine painted , nice job you done on yours

If it was any good they would sell it thru the dealership , they have put it on e bay for a reason pal !

Cool photos , few nice skid marks and some dodgy looking p**s stains in there too . Nice car aswell mind !

]http://i1177.photobucket.com/albums/x354/davis422/DSC01025.jpg][/IMG][/IMG]

[/IMG][/IMG]

I like what you' ve done to the centre console , looks good !

Very nice .

Yeah i noticed you now had the dc5 , nice looking car that . Whats next ?

Enjoyed reading this , did you get an evo ?

Looks nice pal

Nice car boss , colour of champions .

Cracking set of wheels pal .

I do like these cars

Nice sketch

Nice cars pal , i love the sound of the grunt the st gives off when you floor it .